Electronics Forum | Fri Jul 02 13:35:52 EDT 1999 | rick
| | I know this is not so much a technical question, but it didn't fit in the Admin Center either! | | | | I was doing some research on screen printers and found a listing in the 1999 SMTA directory for de Haart Technologies in MA. | | | | Are the
Electronics Forum | Mon Jul 28 05:35:17 EDT 2008 | surendra268
What could be the main reasons for De-wetting in reflow process. Can anybody answer
Electronics Forum | Wed Oct 10 17:56:35 EDT 2001 | seand
Hello all, My respone here is to add options for evaluation for the engineer. Not to convey that they are the only options as that would be reckless. Cyberoptics does have a standard line of machines configured for in line paste inspection. Some
Electronics Forum | Mon Sep 26 16:48:32 EDT 2005 | PWH
Are you using masking? Conformal coat will de-wet (no pin holes usually, though) due to masking tape adjacent to affected areas if the tape glue chemistry isn't compatible with the conformal coat.
Electronics Forum | Mon Jul 28 06:13:35 EDT 2008 | cobar
Your problem is being caused by to much paste being printed.Reduce apeture size on stencil. http://www.shanelo.co.za/technical_paper_about_stencil_de.htm or http://www.shanelo.co.za/SMD%20Assist.htm
Electronics Forum | Wed Feb 06 14:55:15 EST 2013 | davef
I doubt anyone will send you the gerbers for the Benchmarker board. Here are my notes on the board: BENCHMARKER II TEST BOARD * Heraeus Materials Technology LLC [Benchmarker II test board that streamlined material testing for rapid customer support,
Electronics Forum | Wed Jan 14 15:35:33 EST 2004 | patrickbruneel
I found an article that might be of interest to all of you. I believe we as consumers will have to take interest in country of origin when we buy products. U.S. corporations are picking up the pace in shifting well-paid technology jobs to India, Chi
Electronics Forum | Thu Jun 12 12:35:52 EDT 2014 | clydestrum
I didn't even think of running a blade down those scores. I will give it a shot and see. The laminate they're using is Nanya NP-140, if anyone has ever used it or has any info regarding it's issues around something like this. We can see resin weave
Electronics Forum | Thu Jun 25 22:35:26 EDT 2020 | daisy_mu
Hello I am working in a PCB assembly company, we are located in Guanajuato, Mexico. We have an SMT line and assembly. We are Katolec de Guanajuato, you can see the information at https://www.katolec.com/ or you can send an email to marcelo-higa@kato
Electronics Forum | Fri Apr 09 01:41:35 EDT 2004 | Mike Konrad
Although water soluble (OA) flux is technically the easiest flux to remove, it is also the most damaging type of flux if not removed. A dishwasher lacks the pressure and nozzle design to produce the very small water particle size required for thorou