Electronics Forum | Fri Jun 23 14:23:20 EDT 2000 | Brian W.
We used to cure RTV3145 in an oven at 180 F for 2-4 hours Hope this helps, Brian
Electronics Forum | Tue Nov 30 18:33:05 EST 1999 | Brian W.
I have used Loctite, RTV3145, or Tak-Pak to secure the wire. As John said, the wire is usually secured to the board near the lifted lead, and usually at 1/4 inch intervals along the way. Brian W.
Electronics Forum | Fri Nov 04 07:28:31 EDT 2011 | duso02
2577 is basically a thinned a RTV so there really isn't a gel version. You can use an RTV like 3145 first or apply un-thinned 2577 by hand around the base of the connectors prior to the spray step.
Electronics Forum | Thu Apr 28 11:14:27 EDT 2005 | bbarr
If you apply the RTV after coating, what happens to bond strength since you are now bonding to the coating and not the board? Will the caps still survive vibration and shock? I specify applying RTV before coating for this reason. Am I correct? I als
Electronics Forum | Tue Jan 03 17:36:49 EST 2006 | MikeF
If you know you have cleaned any flux residues that were under there you could consider a bead of an electronic grade RTV, such as RTV3145. If you trap any uncleaned residues under there you could have long term reliability problems. But, like Dave
Electronics Forum | Thu Jun 22 09:31:21 EDT 2000 | Rich Ziebell
All, Can anyone point me in the right direction for (sources of info) various ways to quickly cure RTV or atleast speed up the process. Our requirements are to use Dow Corning 3145 hi-temp RTV. I have tried contacting the manufacturer but am losing
Electronics Forum | Thu May 22 18:47:12 EDT 2003 | russ
I would assume we are talking about a radial leaded electrolytic cap? We use Electronic grade RTV (Dow corning 3145). It sticks good and can be removed if necessary. It is also pliable so you don't have to worry about CTE or other stresses that may
Electronics Forum | Mon Feb 11 17:07:07 EST 2008 | blnorman
3145 is methoxy cure, so the cure by product is methanol.
Electronics Forum | Fri Feb 08 06:26:03 EST 2008 | jdumont
Hey that was me way back! Anyways, use Dow 3140 (self leveling) or Dow 3145 (peanut butter consistency) and call it a day. No out gassing/acidic properties. 3140 also contains a UV tracer for black light inspection. Any tall caps should be epoxied if
| 1 |
.jpg)
