Electronics Forum | Wed Jul 26 22:47:14 EDT 2006 | seth
I have problem with RV/D axis counting error. I have tried several things, but it just doesn't help. These are the things I had tried 1. Check all 12 segment for dirty. 2. Check DP motor for proper operation. 3. Replaced reader. In order for me to pe
Electronics Forum | Thu Jul 27 09:48:16 EDT 2006 | john_smith
Seth, have you tried the zero point on the star?
Electronics Forum | Sun Jul 30 11:50:22 EDT 2006 | john_smith
Do the sleeves spin freely in the segment? Could also be that the reader needs to be readjusted.
Electronics Forum | Tue Aug 01 17:12:48 EDT 2006 | seth
My problem solved. I had to re-adjusted the reader,
Electronics Forum | Wed Aug 02 06:39:13 EDT 2006 | john_smith
Good Job!!
Electronics Forum | Thu Jul 27 17:18:43 EDT 2006 | seth
Yes, I have but if I don't then I won't be able to reference run.
Electronics Forum | Mon Jul 31 21:33:58 EDT 2006 | seth
What is the distance from the reader to the segment, and can you use a filler gauge to set the gap or is there a special tool needed?
Electronics Forum | Thu Jan 29 10:05:28 EST 2009 | soudomphong
I am looking for rolling table z-axis p/n 00320165-02. for rv-d head siemens S20. Anyone know where to get it or have it, please contact me via email seth.oudomphong@variosystems.com Thank you. Seth
Electronics Forum | Mon May 16 17:49:13 EDT 2022 | rdssmt
Hi. Please send me a copy of the manual of the Samsung CP20CV and I send the link to downloading the software. https://drive.google.com/file/d/1JlCcG_KkDmqzQe-1S7bmfV0EGSW2RvZn/view?usp=sharing Is a imagen of the software.
Electronics Forum | Thu Jul 21 03:54:39 EDT 2005 | Rob
Never thought I'd hear myself say this (& I will punish myself later). Whatever you do, don't buy an AP25, CP4 or IP2 for starting out in low volume. 1) You will need a LOT of space 2) You will need a very good constant air supply else the AP25 wil
| 1 |
