Electronics Forum | Wed Nov 08 10:04:56 EST 2017 | swag
s100 total cycle cleaner works good.
Electronics Forum | Tue May 21 10:20:09 EDT 2013 | swag
We've been using S100 total cycle cleaner for years - diluted in ultrasonic bath for about 10 minutes. Blow dry with medium psi nozzle. Works great.
Electronics Forum | Fri Feb 06 08:22:32 EST 2009 | davef
Conductivity is the recprical of resistivity. So, ... * 10 uS = 100k ohm * 5 uS = 200k ohm * 2 uS = 500k ohm We're unsure of the units of your conductivity of "1,566 uS/cm". Also, is that one thousand, five hundred, sixty six?
Electronics Forum | Tue Sep 05 10:14:41 EDT 2017 | swag
Try a fid teach on your changers. I don't recall how to do it but you'll find it pretty easy if you surf around. Also, the seals on the nozzles must be good and soft. If you can still get them new, I'd replace. Same goes for seals in changers. C
Electronics Forum | Mon Jun 11 22:06:00 EDT 2001 | davef
The issue is not the cleanliness of your in-bound water. The issue is the cleanliness of the board your customer receives. Look at J-STD-001C, Para 8, "Cleanliness Requirements". The end product cleanliness is the end result of your: * In-bound
| 1 |
.gif)
