Electronics Forum | Fri Mar 02 14:28:08 EST 2007 | stimpk
Chris, Can you boot in SiTest?
Electronics Forum | Wed Feb 28 14:01:15 EST 2007 | john_smith
Chris, Is there a job scheduled down to the machine? If you don't have it you can call Siemens hotline @1-888-smt-help. They will talk you through any problems that you encounter. John
Electronics Forum | Fri Feb 23 09:29:59 EST 2007 | chrisgriffin
I did restore the .ma files, and yes, the computer does communicate with the gantries for zeroing. But the machine is still hung on "initializing machine". It never asks me to push the start button. It is like it is trying to collect necessary dat
Electronics Forum | Sat Mar 03 10:42:49 EST 2007 | chrisgriffin
No. The Sitest button is greyed out. Can I install a regular windows version of NT 4.0, or does it have to be a Siemens version of windows?
Electronics Forum | Tue Mar 13 02:12:04 EDT 2007 | (- -")
You have to install the RMOS to MC's HDD. The RMOS Version must match with the station software. After Install RMOS you have to perform machine distribution.
Electronics Forum | Tue Mar 13 13:06:49 EDT 2007 | tommyttr
I think it is in the ideal.ma or actual.ma file. You could also use the first RMOS boot disk. This will ask you for it there.
Electronics Forum | Wed Feb 21 14:56:09 EST 2007 | chrisgriffin
I just had to replace the hard drive in the SC and the MC. I partitiones the MC drive and installed all operating systems. The machine boots up and gets past "software booting", "conversion of machine data", and then hangs on "initializing machine"
Electronics Forum | Thu Feb 22 14:41:31 EST 2007 | Tom B
Chris, It's been a while since I used a Siemens, but I was thinking its starting communication to Gantries, tables, and WPC for Axis zeroing. Like I said its been awhile! When replacing drive, did you copy the *.ma files back to the drive? Tom
Electronics Forum | Thu Mar 08 04:54:05 EST 2007 | stimpk
ON the older S15's you booted Stest from a floppy. On newer machines you have the capabilities to switching to Stest without rebooting, Although you must be logged in as admin/Service Engineer. Thats why your button is greyed out. Try logging on in s
Electronics Forum | Tue Mar 13 10:17:49 EDT 2007 | chrisgriffin
Thanks for all the help. I have decided to clone the 2 hard drives from my good machine and put them in the broken machine. That will get my machine running but the 2 machines will be addressed the same. Does anyone know what files to change to re
