Electronics Forum | Sat Apr 16 12:14:47 EDT 2011 | kahrpr
S2000 is the Mancorp version of a CP20 basically the same
Electronics Forum | Mon Jul 03 07:30:14 EDT 2000 | steve
DOES ANYONE HAVE EXPERIENCE USING THE S-2000 MACHINE FROM MANNCORP. IT IS A SAMSUNG BASED MACHINE. ANY COMMENTS WOULD BE APPRECIATED.
Electronics Forum | Wed Apr 13 11:54:17 EDT 2011 | jillatchoice
Does anyone know if the CP20 is the same as the S2000? Were they dual marked? Thanks!
Electronics Forum | Tue Jun 23 23:32:26 EDT 2020 | mws1981
I need the software for the machine. If any one has or had one of these machines I could use a copy. Not Free of course. Mike
Electronics Forum | Wed Aug 22 14:39:02 EDT 2012 | wendynguyen234
Our S-2000 pick & place machine has head 2 not picking up any nozzle & displays error code 8342(nozzle check error). In ANC setting, head 1 pick/put ok but not head 2; when "MANUAL" box is checked, clicking PICK/PUT then both head 1 & 2's status disp
Electronics Forum | Fri Feb 13 17:55:49 EST 2004 | Dale Freeman
I populate several thin panels (0.032")using a Samsung S-2000 P-N-P machine. With panel sizes of 8" by 10", it is very difficult to clamp the panels into the machine with deflection and bowing. Also, the Samsung makes it very difficult to adjust the
Electronics Forum | Mon May 19 14:29:27 EDT 2014 | wendynguyen234
We have a Samsung CP20 with window 95, S-2000 MMI version 1.27 from Manncorp Inc. that freeze on window 95 screen. It was found that the mother board was at fault & need to be replaced. We replaced it with a compatible one & kept the original hard dr
Electronics Forum | Fri Aug 14 00:36:55 EDT 2015 | bideas
Hi, I recently purchased a used Manncorp S-2000, which is a rebranded Samsung CP20CV. I can't get into the System Setup menu without a password and the included manual is no help. Does anyone know what the default password might be? Or if there i
Electronics Forum | Thu Jul 18 12:33:21 EDT 2002 | slthomas
Not sure if you're trying to improve your defect rate (we use dpmo) or your test yield. The question is what do you do if you're happy with your dpmo levels but not some of your first pass yield numbers because certain boards have more parts. Inspe
Electronics Forum | Sat Feb 14 12:25:37 EST 2004 | I ramos
I populate several thin panels (0.032")using a > Samsung S-2000 P-N-P machine. With panel sizes > of 8" by 10", it is very difficult to clamp the > panels into the machine with deflection and > bowing. Also, the Samsung makes it very difficult