Electronics Forum | Tue Sep 12 08:39:38 EDT 2017 | jefri_simorangkir
we are turning on the printer, suddenly the printer is off after checking there is solderball on pad capacitor component 0603 our question is what can a solderball stuck on one pad can when melting and causing shortsolder (being connected with other
Electronics Forum | Fri Nov 05 15:44:50 EST 1999 | Tim Jensen
Brian, 96.5Sn/3.5Ag is eutectic at 221 C 95Sn/5Ag has a melting range of 221 - 240 C Hope that helps you out...
Electronics Forum | Fri Nov 05 15:27:30 EST 1999 | Brian
What is the liquidous temp for: 95Sn/5Ag and 96.5Sn/3.5Ag thanks in advance
Electronics Forum | Fri Nov 05 18:14:35 EST 1999 | Jeff Sanchez
Hi Brian, Here is the web address for Indium. If you go to the "technical papers" and then to "specialty solders and alloys" they have a really great chart that has all the alloy specs. Well worth printing. ........Jeff Sanchez
Electronics Forum | Tue Aug 22 11:29:45 EDT 2000 | �ngelo Marques
Hello, Dr. Ning-Cheng Lee The melting point of solder PB-Free its to higher do you now the lower temperature of an PB-Free and its constitution. Its true if the solder paste have in its constitution a Bismut component the melting point its lower?
Electronics Forum | Thu Oct 21 05:42:15 EDT 2010 | jacki
Dear All Does anyone know about the low melting point solder paste which should be Copper Base? Usually the Copper base solder has 227'C of melting point.
Electronics Forum | Mon Nov 01 04:40:29 EDT 2010 | jacki
Hi Mark thanks and useful. However, I couldn't find the Copper base solder paste which melting point is lower than 210'C.
Electronics Forum | Mon Nov 01 11:43:45 EDT 2010 | patrickbruneel
Jacki, Lead-free Cu based alloys with melting point below 210C don’t exist.
Electronics Forum | Wed Aug 23 08:55:39 EDT 2000 | Dave F
Dr. Lee: Taking a tangent on your response ... When talking about alternate solders. Bismuth forms an alloy with lead with a melting point of 93�C. Are there special conditions that cause this alloy to form? Or does the alloy form commonly when
Electronics Forum | Tue Aug 22 15:34:55 EDT 2000 | Dr. Ning-Cheng Lee
An example of very low melting point Pb-free solder is 58Bi/42Sn. Different versions of this alloys have been tried, such as doping with various additives, in order to enhance the reliability further. Yes, Bi is one element which promises low mp for
.gif)
.gif)
