Electronics Forum | Thu Sep 06 03:43:00 EDT 2018 | cmchoue
Dear Experts, Have any paper or data talking about the design guideline for avoiding BGA solder bridge? I desire to know the rule(guideline)that compare difference stencil thickness and safe solder design distance (air gap) can avoid bridge.
Electronics Forum | Mon Mar 04 17:37:24 EST 2019 | SMTA-Joe
Yeah it seems like a no-brainer. Thanks for the tip on the ESD-safe filament. I knew it had to exist. I've narrowed down a few models that seem perfect for this at a surprisingly low price point. Most of them come with their own designer and instru
Electronics Forum | Fri Apr 17 18:39:20 EDT 2020 | kumarb
You will have to bit-copy the original hard drive contents as there are some hidden registry keys on Windows for their software. In our case, the loss of the motherboard coin cell battery resulted in the software thinking that the license had expired
Electronics Forum | Mon May 18 15:30:07 EDT 2020 | dwl
I've seen that before, had to switch to a no clean process for those boards. It's not typical for ferrites, usually its safe to wash them. Out of curiosity does the Data sheet say anything about whether or not they can be washed? In my case we lear
Electronics Forum | Mon Sep 07 08:01:21 EDT 2020 | aurash
Thanks for the good advice - the UPS is fine (to be sure I disable it but the problem was still there) In the meantime we found the root cause - the XMP SyncNet card failed. We replaced it and it's all back in motion. Many thanks to all who had rep
Electronics Forum | Mon Oct 12 17:28:39 EDT 2020 | rgduval
Check the microphone data sheet to find out what the max temperature is...if it's not listed, call the manufacturer. Are you water-washing the board after assembly? Could be water intrusion/entrapment in the microphone. Again, check the data she
Electronics Forum | Tue Feb 09 10:03:05 EST 2021 | grahamcooper22
Just wondering, what do companies who have a stand alone reflow oven use to allow their pcbs to safely exit off the reflow machine conveyor belt or pcb rails ? I've seen home made ramps that the pcb slides down.....but is there any other option ?
Electronics Forum | Tue Feb 09 10:34:53 EST 2021 | jamesn
Hello Gents I have a problem with the head on gantry 2. I think it needs replacing but in the meantime Can anyone on the forum tell me how to disable it so the machine will initialise and run gantry 1 Ive been told it can be done but they cant rememb
Electronics Forum | Tue May 04 18:52:31 EDT 2021 | lasmith132
3 more questions I promise. :) 1. If a populated PCB is put on a ESD safe Rack, is it able to be placed on a Plastic Shelf? 2. If a populated PCB is put in a covered ESD box, is it able to be placed on a Plastic Shelf? 3. Could we put ESD vinyl
Electronics Forum | Thu Feb 10 12:47:47 EST 2022 | bukas
1. disable driver update (system and regkeys) 2. reboot in safe mode 3. disconnect internet 4. uninstall any nvidia driver using IO Bit uninstaller 5. uninstall nvidia and intel drivers using DDU 6. reboot in normal mode 7. install intel driver from