Electronics Forum | Fri Sep 09 06:03:37 EDT 2016 | jswatt
Simple answer is no you cannot do it and why would you?.. is it a cost saving thing? As Dave F correctly points out you have a fair amount of noxious fumes to handle that aren't getting exhausted if you switch of the extraction so they will go to you
Electronics Forum | Sun Jul 10 03:39:12 EDT 2016 | rgarcia0626
We have wave soldering machines with SnPb.... the problem is they want to shut off the exhaust fan when there is no production even if the entire machine was not switch Off and the pots are maintain the 250°C. Can someone give any idea on the implica
Electronics Forum | Thu Jul 07 11:55:03 EDT 2005 | meritajs
Hi, We have problem with ABU IPTE,it indicate Emergency stop, Break,but we can not find all safety switches and sensors because do not have safety drawing. Could somebody help us?
Electronics Forum | Thu Aug 12 06:46:35 EDT 2021 | bukas
there is no, error $0022 in technical reference. is the error you are getting a EMER level? if so there is probably a safety sensor or switch that is causing this error. $0021 is related to door switch so I would go from there. do you have technical
Electronics Forum | Tue Apr 27 11:18:29 EDT 2004 | kuru
We bought a used MPM up3020 screen printer as is. As I power up the machine it would not reset. I have check all safety switches, what is my next place to start. Thanks
Electronics Forum | Thu Mar 14 18:16:58 EDT 2013 | isd_jwendell
With those interlocks tested, and confirmed good. I would check the end-of-travel safety switches next. It may think that the head is at the end of it's travel.
Electronics Forum | Tue Mar 31 15:14:53 EDT 2009 | kpm135
Is your machine an inline system with the conveyors along the back? If so I have run into this problem before with the sensors on the covers for the conveyors. They are 'magnetic' safety switches that can appear to be closed but don't actually switch
Electronics Forum | Tue Aug 05 12:05:20 EDT 2003 | dougt
It looks like I could setup a UPS on this machine one of two ways. The first would be a 3 phase, 208V UPS in series with the machine (sounds big and expensive). The second is a single phase 208V UPS to just the 2 computers. I have a safety concern
Electronics Forum | Thu Sep 15 13:55:31 EDT 2022 | jojoled
Hi all, I need help with problem Iam stuck with JUKI KE760L. -SERVO ALARM 1 and ALARM4 https://photos.app.goo.gl/CCDcNtbbEhJLBo47A Sometimes I do get error ON ALL 4 SERVO drivers (1-2seconds after starting the calibration routine (even before the Z
Electronics Forum | Thu Apr 30 17:06:19 EDT 2020 | bboyer
So, I have inherited a couple of "vintage" GSM1 machines, and we've got one powered up, trying to see if it even works, before registering the machine and paying Universal some money. It appears several of the safety interlock switches are triggered
