Electronics Forum | Fri Jan 14 23:31:35 EST 2022 | tey422
First of all, like I said before, I only worked on similar type of part. For this part, I would add at least 1 of 0603 size solder bead at each end (091845.jpg), 2 of 0402 size solder beads side by side would be even better.
Electronics Forum | Fri Feb 18 20:37:14 EST 2022 | dwl
0402 imperial? all those machines should be able to handle that. Even an old Quad 4C can place those. As others have said, availability of parts in your area will be the issue.
Electronics Forum | Thu Apr 07 14:05:53 EDT 2022 | SMTA-69080803
@cbart It's a mid-volume product and as I said, there are several boards (slightly different layouts) using the same component. When you say ISI, do you mean connectors? can you give me an example of what you used in the past?
Electronics Forum | Thu Aug 18 08:23:31 EDT 2022 | angela t
yes ,i agree he said that Try PCBSynergy - it exports files from Eagle (it supports others too) to Philips / Yamaha machines.
Electronics Forum | Tue Jul 18 11:55:55 EDT 2023 | cyber_wolf
As I said, the intent of the "stepped" feature is to aid in paste release. Continuous is normal mode. I believe the manual explains these features in depth.
Electronics Forum | Wed Dec 06 12:37:04 EST 2023 | stephendo
We have a batch washer. When it was being installed I noticed their was some foam when testing empty. We had already ran a load previously. I asked the installer and he said that it takes very little for there to be foam.
Electronics Forum | Tue Aug 27 15:31:01 EDT 2024 | carl_p
I would start by contacting all the equipment suppliers you have on site regarding their training options. Most of the big companies or distributors will have training centres. That said even the smaller ones should be able to come on site & guide
Electronics Forum | Thu Aug 10 03:30:42 EDT 2000 | JohnW
Ramon, Solder ball' are a bitch aint they?, identifying the right location to fix em is a bigger one. As you and the rest of teh guy's have said yes you'll need to look at your stenil..but maybe your stencil is good so you'll need to look else where
Electronics Forum | Fri Aug 04 15:45:27 EDT 2000 | John Thorup
Ditto to everything said. If everything in the process is correct you will have good success at 25 mil but it will take much care. I have done 20 mil on this type of printer but, as Steve says, I wouldn't want to on a daily basis. Those wipe-offs a
Electronics Forum | Tue Jun 26 10:49:59 EDT 2001 | genny
Yes I have read that standard, but it doesn't tell me what I need to know. Both have the same activity level and halide rating (L0) The AIM technical guy told me RO is a natural gum rosin, while (RE) Resin has more processing or something (maybe so
