Electronics Forum | Tue Apr 03 01:56:37 EDT 2018 | sophyluo1985
Hi All, Anyone want to talk about how do you did the 1st sample inspection in your SMT department? I mean once you want to produce a new product. After the material on board, and before mass production, we always need to do 1 or 2 sample to test if a
Electronics Forum | Tue Mar 08 15:57:51 EST 2016 | sarason
Have you tried the Yahoo group PicknPlace, there are several users of the CSM60 and 84 there. https://groups.yahoo.com/neo/groups/PicknPlace/conversations/messages sarason
Electronics Forum | Tue Apr 03 15:47:43 EDT 2018 | davef
Just to be clear: * First Article inspection is the qualifying of new product/processes and changes. Automotive PPAP approval is a good example. * First Piece inspection is the first off when a process is started.
Electronics Forum | Wed Apr 04 06:36:56 EDT 2018 | sophyluo1985
Hi Dave, I meant the First piece inspection when a process in started. How did you do this first piece inspection ?
Electronics Forum | Wed Apr 04 09:12:41 EDT 2018 | davef
A first piece inspection does two things: 1 Verify that the part meets the requirements on the drawing and specification 2 Document the inspection results
Electronics Forum | Thu Apr 05 22:44:49 EDT 2018 | jandon
We have Quins Professional in use which is quite handy for first article/piece inspection. You can easily compare assembled board to the pick&place file and placement drawings.
Electronics Forum | Thu Apr 05 06:59:30 EDT 2018 | philc
Here, there are two possibilities - either it is a new board to us (ie built elsewhere previously) or it is a new product for the company requesting the build. If new to us only, ask for a sample PCB. You will need CAD data for pick & place machines
Electronics Forum | Wed Mar 02 18:27:36 EST 2016 | hlabs
I purchased a Phillips CSM 84V III for a backup machine several years ago and finally getting around to setting it up. When the floppy is inserted for loading the USER.MCH (also the .FDR and .VIS files) the screen reads file not found but is on the f
Electronics Forum | Wed Apr 04 10:32:10 EDT 2018 | dleeper
At an EMS I used to work for, our process for first article inspection was to have a human technician do a point to point comparison between the BOM and the PCB. They would verify component part #s were correct per the location, correct polarity and
Electronics Forum | Fri May 06 18:19:45 EDT 2005 | Dr. Klein
hello all. i would like to know a process for sampling scrap lever from siplace mechine (madamas prog). what is the everage scrap level? how many times should i sample scrap level during assembly? what are the steps operator should do for fixing hig
winsouce.jpg)
