Electronics Forum | Thu Mar 30 00:47:57 EDT 2017 | mrpackethead
I am trying to set up a YV100ii machine to pick up TQFP's from a manual tray. No matter what i do, it doe snot want to pick up the parts from the tray, but it keeps wanting to try to pick up parts from the place that a feeder would present the part.
Electronics Forum | Fri Jul 31 09:36:17 EDT 2009 | spitkis2
Does anyone know of fully automatic pick and place machines that can pick up parts either from small pieces of cut tape (i.e. 0402's, 0603's, SOT's) or components loosely arranged on a tray (not ic's that are in matrix trays)? Application is proto
Electronics Forum | Thu May 10 13:53:36 EDT 2001 | stefwitt
If you get the price for the tray and holder from Siemens you will follow Dave's recommendation. To get the 0 point for the tray ( from where you measure the first pick position )you set up the tray on the 7th track ( type 51 ). After you sent the da
Electronics Forum | Mon Aug 22 09:48:35 EDT 2005 | PWH
Post a simple CAD picture of a BGA or IC on the door of the machine near where it gets loaded. This has helped us. Flash IC's can also be difficult as you can't always put pin one near front, left of tray slot. So... we always say pin one left no
Electronics Forum | Tue Mar 10 20:43:22 EDT 2020 | victorzubashev
Hi all, I am evaluating the value of the purchase of a universal automated programming machine for SMD IC components(no operator to load/unload the component ). input: SMD reel, JEDEC tray, tubes output: JEDEC tray Required throughput: between 10,000
Electronics Forum | Fri Sep 23 06:42:08 EDT 2005 | lloyd
The only issues I have had in the past with the shuttle are 1. The transport conveyor into the machine was not aligned correctly causing pickup issue from the belt. 2. Operators not correctly loading parts in trays or updating the qty's, this meant
Electronics Forum | Wed May 08 10:56:32 EDT 2002 | cmay
If you are talking about "low" volume another option you could consider is using a waffle tray. At a previous company we made low volume high value flexi-rigids. Like you, no-one would buy volume on reels. Luckily we had our own machine shop and we m
Electronics Forum | Tue May 13 11:12:41 EDT 2003 | k_h
I currently am doing it. Keep in mind the parts are split up, such that, the chips are on one machine and the IC's and odd parts are on the second. It takes much more time to place IC's and odd parts because they need to be handled slower and often c
Electronics Forum | Thu Jul 25 00:42:02 EDT 2013 | felo188
Hello everyone! I have problem with using vision in csm v60. Below describe: 1. Machine's third head takes one IC from tray 2. Goes to vision and take picture and moves IC 3. Goes to pick and place 4. When nozzle wants to place IC on board the
Electronics Forum | Wed Aug 28 10:51:27 EDT 2002 | edmentzer
We use a manual "pick and place" unit similar to the OK product, and it work great. The parts are in a tray and the operator moves the pick up head over the part and press down which turns on the vacuum, the vacuum is turned off when the part is pla
