Electronics Forum | Fri Jan 27 13:01:15 EST 2023 | hta1979
Hi ! The graph of the second head is fine. The graph of the first head shows that the head needs to be cleaned, which is why it detects a nozzle.
Electronics Forum | Tue Jan 24 13:02:55 EST 2023 | elpos
Hello everyone ! I would like to ask for some help regarding the component aligner on the Samsung CP20CV machine (I just bought the machine and I am still learning to use it). I noticed that sometimes when I instruct the Head1 to pick up (any) nozz
Electronics Forum | Tue Sep 15 13:20:02 EDT 1998 | Jim Mitchell
Quad Systems sells the Samsung product with Quad's patented QuadAlign optics system and Quad feeders as opposed to the mechanical centering system available on the product direct from Samsung. Generally, all optical centering is superior to mechanic
Electronics Forum | Fri Dec 09 14:37:04 EST 2005 | derengmao
I am using ver 6.50 software. Do you know Quad Align compared to Cyber or Samsung's own, which is better? Do you know if the QSA30V support non-symatrical Micro-BGA such as DDR2 DRAM IC?
Electronics Forum | Mon Oct 28 15:13:44 EDT 2013 | larrygroves
It will require an alignment. The tools are usually included in the toolbox, one L shaped magnetic tool, a small square glass plate and there is a tool in the nozzle changer. You can buy them seperately if you dont have them. There is a bigger qu
Electronics Forum | Tue Oct 22 19:59:21 EDT 2013 | larrygroves
move the aligner. they are pinned and will likely work without calibration. Yes I sell parts and service. give me a call I have an e copy of the service manual
Electronics Forum | Fri Aug 07 13:03:53 EDT 2020 | assuredtech
SMT Forum, Does anyone know if the Sanyo laser alignments can be replaced with the Cyberoptics brand? If so is it plug and play or does it require any software or machine configuration changes. Thanks in advance
Electronics Forum | Wed Mar 28 20:35:52 EDT 2007 | darby
Quadalign is very similar to the Samsung. I would think that 4% dump on 1206 or even IC is way over the top. If you are certain that your component data is correct; I suspect that your z-axis centring height may be out of whack and that you are eith
Electronics Forum | Thu Oct 17 18:35:29 EDT 2013 | nikyta
Hi Larry, I have a machine where one head has a faulty Z servomotor, and another head has a defective aligner. In the meantime that I procure the required spare parts, what part is easier to swap in order to have at least one head productive? Eve
Electronics Forum | Thu Oct 24 23:19:55 EDT 2013 | wesleyintelli
Heads 2 & 3 on our CP45 are placing poorly. We believe that the head cameras are adjusting the component positions incorrectly since the placement is perfect when vision alignment is turned off. Does anyone have any experience with this issue or acce
