Electronics Forum | Mon Jan 16 09:50:38 EST 2023 | mra
Hi Fern, I'm getting the same error on my CP40 and cannot clear it as well, did you finally find out what to do to solve it? Thanks in advance!
Electronics Forum | Thu Sep 09 13:41:43 EDT 2021 | fernsure
Tried suggested solution in manual to no avail. Reseated every connector we could get to. Has anyone run into this error, and found a solution? This error does not allow me to ignore this head and use the other two. Thanks Fern
Electronics Forum | Mon Feb 18 08:11:27 EST 2019 | tomazicrok3
hello i have samsung cp40cv and this errors comes up can someone help me. vision communication error(1000)(1000), no sequence-finished from handler(%1), no command response from handler (0x2002).
Electronics Forum | Tue Feb 19 02:03:51 EST 2019 | bukas
try first to replace SYS folder, or one by one of its files. if that doesnt work you are looking at complete disk backup. and check disk for bad sectors ofc
Electronics Forum | Mon Feb 18 09:49:43 EST 2019 | bobpan
This is going from my memory from a long time ago...but in the scp.ini file....there could be digital light control and/or a matrix tray handler setting. I would turn them off if they are on. I believe this has something to do with a system setting.
Electronics Forum | Tue Apr 16 01:42:15 EDT 2019 | ledze91
Hello. Got problems with big elements like connectors. Pickup tolerance dont work on cp40/Lv. Here got two machines cp40/lv and one cp40/cv. On cv dont have problems with pickup, but on Lv nozzle hit the pins of connectors or wont pick up
Electronics Forum | Mon Apr 10 15:41:33 EDT 2017 | highmillr
when loading operator pressed "pallet out" button on the Samsung SM321 , she heard a crash and now the shuttle will not home. getting a "home search fault" popping up on the offline. I cant seem to find a manual here or online at all...
Electronics Forum | Tue Apr 11 07:59:24 EDT 2017 | highmillr
Top plate is secure. No abnormal lights in I/O.
Electronics Forum | Tue Apr 11 03:01:52 EDT 2017 | tsvetan
check if the top plate which is used for tray change is on it's place, also in manual mode you can see on Sig.IO page all sensors status and you can figure out which sensor is activated
Electronics Forum | Fri Dec 31 12:26:29 EST 2010 | kvael
Has any one had this problem? Dynatech says it is the I/O Dpram board, sold me one that dosen't work. Bought a second Dpram from SMTBOX, still have the same original problem. During Dpram initialization error comes up "no command response from handl
winsouce.jpg)
