Electronics Forum | Wed Oct 12 02:44:38 EDT 2016 | bukas
hello, I have a problem with CP45FV Neo swing mirror. The mirror it self works fine, manually controlled it moves to correct position and back. While working it also moves properly but when machine is about to check for nozzle existence at the end of
Electronics Forum | Tue Mar 07 09:35:55 EST 2017 | buckcho
hello, I have a problem with CP45FV Neo swing > mirror. The mirror it self works fine, manually > controlled it moves to correct position and back. > While working it also moves properly but when > machine is about to check for nozzle existence a
Electronics Forum | Tue Jul 18 03:11:48 EDT 2017 | tsvetan
I recently bought: PCB Loader, Full Automatic Printer with vision with 10 seconds print time, 1 meter Inspection Conveyor, Samsung SM482+Feeders, 1 meter Inspection conveyor, Reflow oven for similar budged, all machines new. I bought them directl
Electronics Forum | Wed Oct 18 09:45:23 EDT 2017 | alexeis
Hi, You have 2 options: 1. You can pay for a software solutions but it can't do 100% work. You will complete manually a conversion (between 5%-50% based on a complex of your board, type of component and other problems). 2. Do it by your self using E
Electronics Forum | Wed Aug 07 01:44:52 EDT 2019 | orbitcoms
I have several reels of components I purchased from Chinese source. During pick and place, the tapes keep breaking (they tear diagonally along the reel). I notice the tape is very tight if I try to pull through manually. I tried several over 12mm fe
Electronics Forum | Mon Jul 25 23:05:40 EDT 2022 | kamedatec
I did something similar on Neoden machines. VisualPlace software helps a lot with this task, but the coordinates are never in the correct area where the PCB is, so I manually check the position of the first component and my software adjusts the posit
Electronics Forum | Thu Jul 21 05:04:42 EDT 2022 | kamedatec
I live in China and I need to buy a new SMD assembly line. I have 2 NEODEN7 machines that I've used in the last few years to assemble prototypes, they work fine only for prototypes. During that time I created a very practical way to transform Altium
Electronics Forum | Fri Mar 22 03:19:43 EDT 2019 | bukas
well, in video shown it looks like #1 motor drives head #1 upwards but does not detect home sensor being triggered. and then you get timeout error, head not being able to reach the position ( machine not registering it has reached position). since yo
Electronics Forum | Thu Mar 21 12:09:28 EDT 2019 | alexcouto
Hello Bukas, thanks again. Since at an early stage I switched heads # 1 and # 6 and they are not compatible, then I went through the manual and figured out why. in order to start at the beginning and check that it had not damaged anything, I put the
Electronics Forum | Wed Apr 01 10:51:06 EDT 2015 | superlen
Hello, I have a question/request for information on the Samsung .SSA format. I have written a utility that automatically takes our board information (from our MRP) and generates an .SSA file. It works well except for the fact that I cannot get our C
.gif)
.gif)
