Electronics Forum | Sat Jan 23 05:21:09 EST 2016 | spectrumsmt
Hi Rick, we sell a very good after market recalibration jig which is available to calibrate most makes including Samsung. We also sell nozzles and feeders! Please get in touch or have a look at the website spectrumsmt.com All the best Ian
Electronics Forum | Mon Feb 14 14:46:42 EST 2005 | russ
We use Samsung and our 24mm feeders have 8,12,16,and 20mm pitch settings. I have found 20mm pitch quite common. My favorite is yhe 12 on 12 our feeders don't support that, we have to put them up on 16mm feeders our cycle them 3 times on a 4mm pitch
Electronics Forum | Fri Oct 01 13:04:09 EDT 2004 | dorklover664
The company that I work for just bought two new Samsung pick and place machines (CP45FV). I love them. But we are having problems with the vibe stick feeders that we have. They have no groves or slots for the parts so if the tubs move at all the pla
Electronics Forum | Tue Dec 22 10:55:07 EST 2009 | wolverine
Will Samsung CP45 feeders work on a CP40 machine? Thanks
Electronics Forum | Thu Oct 04 00:05:25 EDT 2018 | gaintstar
Flason SMT chip mounter Reflow Ovens: http://www.flason-smt.com/product/PCB-assembly-line-equipment-SMT-spare-parts-Dek-Motor-188962.html http://www.flason-smt.com/product/PCB-Conveyor-for-LED-Production-Line-SMT-Assembly-Line.html http://www.flason-
Electronics Forum | Fri Mar 13 05:12:06 EDT 2009 | geb
Hi, Does anyone have problems with the cover tape not peeling back on the 8mm wide feeders. We often find that particularly at the start of the job, the cover tape doesn't peel back causing mis-picks. Thanks, Grant
Electronics Forum | Sun Aug 24 23:19:34 EDT 2014 | darby
I have 2 x CP45FV, 2 X CP45-Neo FV and 2 X Tenryu FV7100V (forerunner of M2. Personally, I think the machines are about equal although CP-45 are probably easier to operate and program. The i-Pulse are a bit more eccentric and programming and operatio
Electronics Forum | Thu Jun 18 23:24:12 EDT 2020 | jmelson
About 12 years ago, this forum was hugely helpful in guiding me to get a Philips CSM84, with no vision. (That might have been a mistake.) Now, I'm moving to smaller parts, especially TSSOP and QFP with 0.5 mm pitch, and the CSM just isn't accurate
Electronics Forum | Mon Aug 08 07:45:23 EDT 2011 | geb
Although I don't have the same model machine (ours is Samsung CP45FV) our Vib feeder had a "transportation" screw or strap (it was a few years ago) fitted that you need to remove before it vibrates properly. Ours has a on/ off switch on the feeder
Electronics Forum | Thu Mar 24 09:57:56 EST 2005 | aj
Jason, I dont know anything about samsungs but in relation to CP6 I could not praise it enough. Totally reliable,as fast Industry requires, consistent,easily maintained,plenty of feeder locations ,very wide component placement capabilities...... aj
