Electronics Forum | Fri Dec 31 12:26:29 EST 2010 | kvael
Has any one had this problem? Dynatech says it is the I/O Dpram board, sold me one that dosen't work. Bought a second Dpram from SMTBOX, still have the same original problem. During Dpram initialization error comes up "no command response from handl
Electronics Forum | Fri Apr 05 01:52:57 EDT 2024 | ddfreeze
Samsung SM321 machine fails to initialize when booting software. I have swapped PCI and communication boards, all resulting the same, I replaced the CMOS battery on communications board, tested the voltage on the backplane, and reloaded the software
Electronics Forum | Mon Feb 26 11:10:59 EST 2024 | clpassoni
When the pick&place is at speeds above 80%, the X driver displays error 21, at lower speeds (
Electronics Forum | Tue Feb 27 00:31:36 EST 2024 | erikfriesen
What do you mean by driver? Maybe it's a weak encoder.
Electronics Forum | Tue Feb 27 10:34:37 EST 2024 | clpassoni
Servo motor. Maybe it's a weak encoder? This can happen? Is there any adjustment that can be made?
Electronics Forum | Wed Feb 28 01:10:33 EST 2024 | clpassoni
As I have two identical machines, it was easy, it really is the encoder, and as it is integrated into the motor it will be necessary to change the entire unit, or try to repair the encoder.
Electronics Forum | Tue Feb 27 11:43:18 EST 2024 | erikfriesen
I think error 21 at the drive is encoder communication issues, but google may tell you more. It's probably going to be one of three things, either the encoder, the cable, or the drive. I don't recall, but is the encoder integrated on the motor? If yo
Electronics Forum | Mon Dec 13 11:27:39 EST 2010 | kvael
I have a Samsung CP30V machine that when starting up gives me the error "NO COMMAND RESPONSE FROM HANDLER". Has anyone had this problem. I have replaced the I/O Dpram board, no change.
Electronics Forum | Fri Nov 28 18:50:52 EST 2025 | erikfriesen
Is there a known way to decode *.pcb and *.opt files for the CP45FV NEO? The initial problem is that I had to edit my anc and remove some nozzles, and now I've put them back, and every new pcb I get this mismatch error, and I really don't know how t
Electronics Forum | Tue Apr 23 07:08:35 EDT 2019 | robertorocco
Good morning I have a problem with start my Samsung CP40 C machine. After the start Bios win98, and Dpram Initialise, system loading , vision data loading, one icone error visualize: Error Mcp, General error SCP.Exe. Solutions? Thanks
