Electronics Forum: samsung cp45f/cp45fv/cp45fvneo amp switch (Page 1 of 3)

samsung SM321 machine freezes on initializing

Electronics Forum | Wed Apr 10 21:47:55 EDT 2024 | ddfreeze

have swapped 2 different boards, can try switching the dram sticks, or ordering new ones. also the cmos battery on the motrola communications battery was dead, put a new one in, was wondering if there was a cmos reset/ jumper?

Samsung CP45FV NEO main start switch problem

Electronics Forum | Tue Feb 25 03:32:58 EST 2020 | bukas

hello guys, I got a problem with MAIN START switch on Samsung CP45FV NEO. The switch itself works, and it activates contactors #1-1 #1-2 and #3 but after pressing READY button there is en error msg reporting that MAIN START has not been pressed. Alre

Samsung CP45FV NEO main start switch problem

Electronics Forum | Thu Apr 30 02:09:50 EDT 2020 | bukas

Thank you for you reply yernie. This forum is about industrial electronics assembly machines and technologies and not about smartphones. btw, the problem was IF board if anyone was wondering.

Samsung CP45FV NEO main start switch problem

Electronics Forum | Wed Apr 29 17:46:08 EDT 2020 | yernie

Maybe your phone had factory defect, I think if you will go to the flagman store they will offer you a solution or even exchange your defected phone to the new one. I have tried the same when I lived in my property in France and consultant suggested

Samsung CP45FV NEO main start switch problem

Electronics Forum | Tue Aug 10 20:34:44 EDT 2021 | jamesatqkits

Hi Could you explain what the IF board is? I am getting a 1002 ALARM occurred in MIR axis, i cannot figure out what its trying to tell me. I have never been able to make this machine work. Would you have any ideas? Thank you have a great day. I was r

Samsung CP45FV NEO main start switch problem

Electronics Forum | Wed Aug 11 06:39:29 EDT 2021 | bukas

Hi James, make sure you have healthy HDD and disk image. These machines are a bit prone to data corruption after all these years and it can often look like hardware problem. I had a problem with mirror axis that turned out to be corrupted data. Ther

Samsung CP45FV NEO main start switch problem

Electronics Forum | Thu Aug 12 15:39:36 EDT 2021 | bukas

it can be cable. can you swap cables with next driver? also swap cables on head. if same driver shows error you need new driver probably. if new driver shows error then its cables or motor. check documentation to see what motor it drives. you cant sw

Samsung CP45FV NEO main start switch problem

Electronics Forum | Thu Aug 12 06:46:35 EDT 2021 | bukas

there is no, error $0022 in technical reference. is the error you are getting a EMER level? if so there is probably a safety sensor or switch that is causing this error. $0021 is related to door switch so I would go from there. do you have technical

Samsung CP45FV NEO main start switch problem

Electronics Forum | Wed Aug 11 12:41:05 EDT 2021 | jamesatqkits

Hi Bukas, Thanks for getting back to me. What is the IF board? Is that the Interface Boards in the cage? How do I know if I have a healthy hard drive? Is there anything in particular to look for? I will run chkdsk today and see if it reports any

Samsung CP45FV NEO main start switch problem

Electronics Forum | Thu Aug 12 12:50:14 EDT 2021 | jamesatqkits

Hi Bukas, Err 22 shows up on the Panasonic motor driver in the back. I purchased this machine used. I have never had it operating in my shop. I checked the output of the transformer, 110 V output is 97 220 is 197, so I checked my input its 200 (machi

  1 2 3 Next

samsung cp45f/cp45fv/cp45fvneo amp switch searches for Companies, Equipment, Machines, Suppliers & Information

Voidless Reflow Soldering

Training online, at your facility, or at one of our worldwide training centers"
Win Source Online Electronic parts

Smt Feeder repair service centers in Europe, North, South America
Win Source Online Electronic parts

Have you found a solution to REDUCE DISPENSE REWORK? Your answer is here.
PCB Handling Machine with CE

Component Placement 101 Training Course
PCB Handling with CE

Software for SMT placement & AOI - Free Download.


Original SMT Feeders and spares for Panasonic, Fuji , Yamaha, Juki , Samsung