Electronics Forum | Mon Feb 26 11:10:59 EST 2024 | clpassoni
When the pick&place is at speeds above 80%, the X driver displays error 21, at lower speeds (
Electronics Forum | Tue Feb 27 00:31:36 EST 2024 | erikfriesen
What do you mean by driver? Maybe it's a weak encoder.
Electronics Forum | Tue Feb 27 10:34:37 EST 2024 | clpassoni
Servo motor. Maybe it's a weak encoder? This can happen? Is there any adjustment that can be made?
Electronics Forum | Wed Feb 28 01:10:33 EST 2024 | clpassoni
As I have two identical machines, it was easy, it really is the encoder, and as it is integrated into the motor it will be necessary to change the entire unit, or try to repair the encoder.
Electronics Forum | Tue Feb 27 11:43:18 EST 2024 | erikfriesen
I think error 21 at the drive is encoder communication issues, but google may tell you more. It's probably going to be one of three things, either the encoder, the cable, or the drive. I don't recall, but is the encoder integrated on the motor? If yo
Electronics Forum | Tue Nov 27 03:39:49 EST 2018 | bukas
problem solved, it was corrupted system file.
Electronics Forum | Mon Dec 02 10:33:46 EST 2013 | sarivong0914
Hello all, We have a Samsung CP45FV Neo, and I'm having problems with the operating software. I have a PCB with 2 different rev's. Rev. A boards was programmed to run Vertical. Then Rev.B boards are horizontal but was programmed to run vertical.
Electronics Forum | Tue Feb 25 03:32:58 EST 2020 | bukas
hello guys, I got a problem with MAIN START switch on Samsung CP45FV NEO. The switch itself works, and it activates contactors #1-1 #1-2 and #3 but after pressing READY button there is en error msg reporting that MAIN START has not been pressed. Alre
Electronics Forum | Fri Jul 23 08:50:41 EDT 2021 | sophyluo1985
Tell GOLDLAND about your problem, they are very familiar with Samsung devices and may be able to help you sales07@feedersupplier.com
Electronics Forum | Wed Oct 12 02:44:38 EDT 2016 | bukas
hello, I have a problem with CP45FV Neo swing mirror. The mirror it self works fine, manually controlled it moves to correct position and back. While working it also moves properly but when machine is about to check for nozzle existence at the end of
