Electronics Forum | Sat Jan 23 05:21:09 EST 2016 | spectrumsmt
Hi Rick, we sell a very good after market recalibration jig which is available to calibrate most makes including Samsung. We also sell nozzles and feeders! Please get in touch or have a look at the website spectrumsmt.com All the best Ian
Electronics Forum | Mon Jan 18 12:03:37 EST 2016 | rfm2nd
would anyone possibly have the calibration jigs to be used in calibrating the cp-45 and/or the cp-60 machines from Samsung?
Electronics Forum | Mon Jan 18 12:04:24 EST 2016 | rfm2nd
would anyone possibly have the calibration jigs to be used in calibrating the cp-45 and/or the cp-60 machines from Samsung?
Electronics Forum | Fri Oct 01 13:04:09 EDT 2004 | dorklover664
The company that I work for just bought two new Samsung pick and place machines (CP45FV). I love them. But we are having problems with the vibe stick feeders that we have. They have no groves or slots for the parts so if the tubs move at all the pla
Electronics Forum | Mon Dec 25 14:23:17 EST 2017 | robertorocco
This machine is OK. The price is 7000 euro with 10 feeders 8mm
Electronics Forum | Mon Feb 14 14:46:42 EST 2005 | russ
We use Samsung and our 24mm feeders have 8,12,16,and 20mm pitch settings. I have found 20mm pitch quite common. My favorite is yhe 12 on 12 our feeders don't support that, we have to put them up on 16mm feeders our cycle them 3 times on a 4mm pitch
Electronics Forum | Fri Oct 01 14:06:08 EDT 2004 | russ
after we teach their positions We tape the sticks down. It is also helpful to make sure that you tighten the "discs" that are located on the tension rods. There are available if you desire guides and stops from Samsung that attach directly to the fe
Electronics Forum | Wed Mar 06 20:46:31 EST 2024 | erikfriesen
Does anyone else calibrate Samsung CP feeders? I've done a handful here on my machine, I wonder what the proper way to do this is. Set the rear stop first, then the front notch point? They seem to need to be together, but its a bit cumbersome to g
Electronics Forum | Fri Oct 01 13:47:24 EDT 2004 | lgroves
Megan, Sounds like you are missing the adjustable guides on the vibe feeders- Please contact me directly so I can help you get them working correctly Larry
Electronics Forum | Tue Jul 27 11:40:13 EDT 2021 | proceng1
Is this the tray feeder that comes with the SAMSUNG SMT machines? If so, I believe the SUPERVISOR password is 1000
