Electronics Forum | Tue Mar 27 16:57:41 EDT 2018 | warwolf
You could try changing the SMC pneumatic cylinder? We had a few that needed them replaced, we would get a pick error from them and the part would not be presented in the tape pocket (as if the tape doesn't push far enough to click over the ratchet s
Electronics Forum | Wed Jan 10 09:36:06 EST 2018 | buckcho
Interesting. If all 52 of them fail, you need to change one special part that is controlling the air cylinders, I forgot the name, it was long time ago I used the machine. I there a possibility to test them on other machine, maybe some other company?
Electronics Forum | Wed Jan 03 15:24:49 EST 2018 | proceng1
I'm not sure it would explain your feed issue, but the main thing that we have found to cause problems is the two nylon gears that pull the tape. The teeth get bent, and they don't mesh together as well, causing the tape to not pull correctly. Or t
Electronics Forum | Fri Jan 05 11:10:05 EST 2018 | andrewnoland17
hello, my colleague ProcEng1 is right. The main > problems are the gears, which easily are stuck > with foil, the shutter, which has to be > lubricated and not bend. Air cylinders on the > machine have to be changed if you have misfeeds > still.
Electronics Forum | Thu Jan 04 02:40:55 EST 2018 | buckcho
hello, my colleague ProcEng1 is right. The main problems are the gears, which easily are stuck with foil, the shutter, which has to be lubricated and not bend. Air cylinders on the machine have to be changed if you have misfeeds still. They look pret
Electronics Forum | Thu Oct 04 00:05:25 EDT 2018 | gaintstar
Flason SMT chip mounter Reflow Ovens: http://www.flason-smt.com/product/PCB-assembly-line-equipment-SMT-spare-parts-Dek-Motor-188962.html http://www.flason-smt.com/product/PCB-Conveyor-for-LED-Production-Line-SMT-Assembly-Line.html http://www.flason-
| 1 |
winsouce.jpg)
