Electronics Forum | Sat Jan 23 05:21:09 EST 2016 | spectrumsmt
Hi Rick, we sell a very good after market recalibration jig which is available to calibrate most makes including Samsung. We also sell nozzles and feeders! Please get in touch or have a look at the website spectrumsmt.com All the best Ian
Electronics Forum | Fri Oct 01 13:04:09 EDT 2004 | dorklover664
The company that I work for just bought two new Samsung pick and place machines (CP45FV). I love them. But we are having problems with the vibe stick feeders that we have. They have no groves or slots for the parts so if the tubs move at all the pla
Electronics Forum | Tue Dec 22 10:55:07 EST 2009 | wolverine
Will Samsung CP45 feeders work on a CP40 machine? Thanks
Electronics Forum | Tue Aug 03 03:27:35 EDT 2004 | kent_peterson
You have alot of advantages staying with the Samsung. The CP60 is a great machine. With the removable carts for setting up in advance giving quick change over. Very good price and better service for you than we get here. Their parts teach on these is
Electronics Forum | Fri Mar 13 05:12:06 EDT 2009 | geb
Hi, Does anyone have problems with the cover tape not peeling back on the 8mm wide feeders. We often find that particularly at the start of the job, the cover tape doesn't peel back causing mis-picks. Thanks, Grant
Electronics Forum | Thu Oct 04 00:05:25 EDT 2018 | gaintstar
Flason SMT chip mounter Reflow Ovens: http://www.flason-smt.com/product/PCB-assembly-line-equipment-SMT-spare-parts-Dek-Motor-188962.html http://www.flason-smt.com/product/PCB-Conveyor-for-LED-Production-Line-SMT-Assembly-Line.html http://www.flason-
Electronics Forum | Thu Mar 24 09:57:56 EST 2005 | aj
Jason, I dont know anything about samsungs but in relation to CP6 I could not praise it enough. Totally reliable,as fast Industry requires, consistent,easily maintained,plenty of feeder locations ,very wide component placement capabilities...... aj
Electronics Forum | Sun Aug 24 23:19:34 EDT 2014 | darby
I have 2 x CP45FV, 2 X CP45-Neo FV and 2 X Tenryu FV7100V (forerunner of M2. Personally, I think the machines are about equal although CP-45 are probably easier to operate and program. The i-Pulse are a bit more eccentric and programming and operatio
Electronics Forum | Sun Apr 13 02:36:06 EDT 2014 | alexeis
Hi, We have system called Setup Center for Samsung that can give a solution to your needs. It loads samsung files, including before and after optimization, and gives you feeder list splitted by machine and side (Front/Rear). Also, you can go over on
Electronics Forum | Mon Aug 08 07:45:23 EDT 2011 | geb
Although I don't have the same model machine (ours is Samsung CP45FV) our Vib feeder had a "transportation" screw or strap (it was a few years ago) fitted that you need to remove before it vibrates properly. Ours has a on/ off switch on the feeder
winsouce.jpg)
.gif)
