Electronics Forum | Fri Apr 22 10:43:30 EDT 2016 | andreferreira
Hy, I do programs pick & places Samsung . I have a line consisting of a sm471 and sm482 ! to make progamas and optimizes them use easyOlp 6.0.19.1 , these machines use electrical feeders that is SM8 for 0805 SM12 for circuits . My problem is that whe
Electronics Forum | Fri May 06 08:27:38 EDT 2016 | kahrpr
We have Samsung and havehad no problems with simultaneous pick ups with 201s 0r 402s. the feeders are durable and do not need much repair especially the sm feeders. The SME feeders have not been out as long so we will see so far so good. As with all
Electronics Forum | Thu May 05 19:13:33 EDT 2016 | darby
Thanks Sr. If you have zero tolerance for simul pick up in your component files then you will not have simul pick up due to variances in your head offsets. So you are saying that on your Juki you run a tolerance for 0201? All other head positions at
Electronics Forum | Wed Aug 07 01:41:27 EDT 2019 | orbitcoms
Hi I am having trouble getting solder bridges on TQFP-100 (0.5mm pitch) components. The boards are pasted on semi-auto printer using laser-cut 0.12mm stencil and SN63 NC257-2 T4 paste. The components are placed using Samsung CP40LV and tghen reflow
Electronics Forum | Wed Aug 07 01:44:52 EDT 2019 | orbitcoms
I have several reels of components I purchased from Chinese source. During pick and place, the tapes keep breaking (they tear diagonally along the reel). I notice the tape is very tight if I try to pull through manually. I tried several over 12mm fe
Electronics Forum | Sat May 04 13:06:40 EDT 2024 | erikfriesen
We are using these Cover tape extenders https://smtsupplies.com/products/cover-tape-extenders-8-12mm-yellow-500-per-box The problem we have is that we have on 8mm feeders is that these leaders are harder plastic, and we have to put fishing weights o
Electronics Forum | Fri Dec 07 15:12:56 EST 2007 | teodor
Hello , I would like to collect your valued opinions what is better for beggining . Samsung CP-45NEO Juki 2060 Light Feeder Positions (8 mm) 104 80 PCB Size (min - max) 50x30-460x400 mm 50x30-410x360 m
Electronics Forum | Wed Jul 01 01:25:58 EDT 2020 | jmelson
> I think the main > issue is the bend radius you can apply to tape > with deeper pockets. Right, on my Philips CSM84, on the larger tapes, I don't thread the tape through the return slot, I let it play out the front of the feeder. The
Electronics Forum | Thu Oct 04 00:05:25 EDT 2018 | gaintstar
Flason SMT chip mounter Reflow Ovens: http://www.flason-smt.com/product/PCB-assembly-line-equipment-SMT-spare-parts-Dek-Motor-188962.html http://www.flason-smt.com/product/PCB-Conveyor-for-LED-Production-Line-SMT-Assembly-Line.html http://www.flason-
Electronics Forum | Thu Jun 18 23:24:12 EDT 2020 | jmelson
About 12 years ago, this forum was hugely helpful in guiding me to get a Philips CSM84, with no vision. (That might have been a mistake.) Now, I'm moving to smaller parts, especially TSSOP and QFP with 0.5 mm pitch, and the CSM just isn't accurate
winsouce.jpg)
