Electronics Forum | Mon Feb 18 08:11:27 EST 2019 | tomazicrok3
hello i have samsung cp40cv and this errors comes up can someone help me. vision communication error(1000)(1000), no sequence-finished from handler(%1), no command response from handler (0x2002).
Electronics Forum | Tue Feb 19 02:03:51 EST 2019 | bukas
try first to replace SYS folder, or one by one of its files. if that doesnt work you are looking at complete disk backup. and check disk for bad sectors ofc
Electronics Forum | Mon Feb 18 09:49:43 EST 2019 | bobpan
This is going from my memory from a long time ago...but in the scp.ini file....there could be digital light control and/or a matrix tray handler setting. I would turn them off if they are on. I believe this has something to do with a system setting.
Electronics Forum | Tue Jan 24 08:01:32 EST 2012 | wolverine
When using the rectangular plate given with the machine that is used with calibrating the movable camera, does the longer side of the plate get fed into the machine ( rails set to 80mm ) or the shorter side ( rails set to 74mm ) Thanks Dave
Electronics Forum | Sun Jan 29 12:55:38 EST 2012 | tech_fun
i don't thing that it is a rule. the only ideea is to mov the camera exactly above the hole in the middle.
Electronics Forum | Fri Dec 17 09:04:17 EST 2010 | wolverine
We have an older model CP40-LV that will start out the day with blurry and double vision, then after about twenty minutes of just idling, the vision slowly improved until the machine could find the board fiducials and do a passable placement job. Th
Electronics Forum | Thu Oct 20 16:42:53 EDT 2005 | PWH
Does anyone know if it is possible to run 0402/0603/0805/1206's on a Samsung CP30V vision system? I'm attempting to get some life out of this machine but greatly dislike the chucking nozzles. My hope is to run rect. packages accross vision using M1
Electronics Forum | Sun Jun 21 02:43:27 EDT 2020 | jmelson
I'm planning to upgrade my P&P. We had a local auction that included a Samsung CP45FV. I was able to download a NEO manual, it was very well written and the Samsung software looks just incredible for setup and programming the vision system. But, t
Electronics Forum | Fri Oct 21 08:03:40 EDT 2005 | Mike
Hello Darby, because of the machine configuration it depents very strong on the feeder configuration and on the board if the 3 heads more give you so much more CPH. Realistic it will only be 1-2000 CPH more in realistic operation. On the other hand
Electronics Forum | Tue Aug 05 10:01:42 EDT 2003 | Sat
You are welcome and thank you for all the inputs. You are right in that these new machines have the camera vision. Like I said in my other post, my engg's like all the machines but prefer Universal and Mydata for a bit more available flexibility like
Industrial Sensor Vision International specializes in advanced camera technology of high resolution fast speed cameras for automation, AOI, 2-D/3-D, SPI inspection and wafer inspection.
3 Morse Road 2A
Oxford, CT USA
Phone: +1 203 592 8723
.gif)
