Electronics Forum | Fri Sep 02 07:38:13 EDT 2005 | DannyJ
Hi Mike, I haven't tried the 0201s with a Hyrda, but after seeing 20 reviews of your message without a response, I'll try and share my experience with 0402s on a non-Hydra machine. The 0402s are slow, but I managed to get some speed by maxing out
Electronics Forum | Thu Mar 10 23:26:46 EST 2005 | timekey
Of course a new machine out of the box should perform at a realistic Sigma level and it's not unfair to hold a machine manufacturer true to their claims. However, even if a new machine does meet the criteria on day 1, the numbers will be constantly c
Electronics Forum | Tue Jan 31 15:15:13 EST 2006 | russ
Heat guns used improperly will definitely damage components. You must have a controlled heat gun that can be set to the max temp you want pb =215C max, Pbfree maybe 240C max. This heat gun must not be able to be adjusted or you must have total trus
Electronics Forum | Tue Feb 15 00:27:39 EST 2011 | jeffr
First clean and de-bur the hole in the nozzle, then try it again. If the Head does not pick up at the feeder, then moves to the dump position...it means that the Vacuum Sensor Board has detected that the nozzle vacuum is above the LOW threshold setti
Electronics Forum | Thu Jun 22 04:35:19 EDT 2006 | emeto
Hi netellink, I am not familiar with suzuki machines, but it usually works that way. There is a sign on the nozzle(it could be dots or lines...)and a recognition file for it. So you have to check: - if the sign the machine is looking for is damaged
Electronics Forum | Fri Aug 16 15:47:56 EDT 2013 | larrygroves
Hi, I know it's confusing. The 421 is sold with two different vision cameras, standard and megapixel. It depends where you buy the machine. North american machines come with the megapixel cameras standard and will just need a Cn020 nozzle and app
Electronics Forum | Mon Oct 19 15:43:37 EDT 2009 | dilogic
We have a problem with QFN IC's with NiPdAu plated pads. Our ULC's don't see the pads due to the almost ideal reflection. Vision sees the pads almost black. As we don't have OAL-cameras (which can help in this case, I assume), I am thinking of back-l
Electronics Forum | Fri Jan 16 15:46:07 EST 2015 | comatose
We did 0402s for years on a GSM. Is this a flexjet or a 4 spindle head? A flexjet is easy with 0402s. The four spindle nozzles are big, you run into issues with knocking already places parts and having to Z zone carefully (and beware repair cycles.)
Electronics Forum | Fri Jan 16 16:57:14 EST 2015 | dilogic
I doubt you will be able to get satisfactory results with 0201. 0402 is another story. When doing 0402 projects, we use only electric (MP) feeders and always at the same feeder slots (feeder teach done for each of them). MPF08 nozzle works fine. Also
Electronics Forum | Tue Nov 21 15:09:14 EST 2006 | ratsalad
Yes. I figure if someone can make use of it, they can have it.
.gif)
