Electronics Forum | Sat Jan 26 19:16:30 EST 2008 | mika
Can you have the designer to make a fixed area for this barcode? Meaning that you must have a position for this at the very same spot, unless your barcode system can be programmed to do barcode scanning on different spots, for different products/boar
Electronics Forum | Tue Mar 17 11:06:33 EDT 2009 | cyber_wolf
We have never been able to get our IP3 to place BGA's consistently. We installed new bulbs,ran glass plate calibration,played with scan speeds, scan area etc. etc.... I would not recommend this machine for BGA's
Electronics Forum | Mon Sep 28 06:03:28 EDT 2009 | bobpan
You are probably scanning below the part. Adjust the scan height closer to 0 ex..(.005) and see if that works. If not....its probably the z-rod and the nozzle not seating on it correctly. Good luck
Electronics Forum | Wed Jun 15 12:23:46 EDT 2011 | gregcr
Hi All, I'm gathering information on what is available for BGA inspection. I have worked with a few x-ray systems, but would like any input on CT Scan systems. thanks
Electronics Forum | Tue Feb 16 12:14:12 EST 1999 | Gregg Reick
| Hope some of you out there can help me with this one. | I am getting feedback from our test department that they are showing opens on solder joints which have visually good wetting. The touch-up operators confirm that the joint looks good. All they
Electronics Forum | Wed Sep 22 22:21:31 EDT 1999 | JAX
| Hi All, | | We have 19 Siemens machine running here and lately I was assigned to come out with a proposal on the wrong part issue on Siemens Machines. All of our machines are equip with siemens part verification in which there the part barcode is
Electronics Forum | Thu Jan 17 18:29:01 EST 2002 | Bill Loving
Dear Jason, Thank you for posting your request on SMTNET. Please note that ScanCAD International provides an upgrade path for all installed customers, regardless of the age of their system. Currently, hundreds of systems are installed in 37 countr
Electronics Forum | Thu Jan 17 18:33:24 EST 2002 | Bill Loving
Dear Jason, Thank you for posting your request on SMTNET. Please note that ScanCAD International provides an upgrade path for all installed customers, regardless of the age of their system. Currently, hundreds of systems are installed in 37 countr
Electronics Forum | Wed Feb 13 17:33:07 EST 2002 | Sheri Connor
Hi Dave, I wanted to make sure you have current contact information for us: ScanCAD International, Inc. PO Box 598 19181 Hwy 8 Morrison, CO 80465 Phone: 303.697.8888 Fax: 303.697.8580 Not only do we sell our scanning systems, we also have a Serv
Electronics Forum | Wed Dec 26 15:27:07 EST 2001 | johnspade
Hi Yannick, Smart Sonic has just introduced the "Assembly Module" to their StencilScan AOI software package. By adding the Assembly Module to StencilScan AOI, one workstation allows you to inspect and compare the stencil to the PCB and Gerber data a
