Electronics Forum | Tue Mar 08 09:57:04 EST 2016 | rgduval
Make sure that your fiducials are selected to be used for global correction. I've had this problem with our machine running OS2, and in the UI for that, you have to select the fiducials in the fid screen, and then there's a menu option to select the
Electronics Forum | Mon Apr 26 08:15:37 EDT 2004 | pjc
MPM uses a one-print-Mylar system, as do other printer mfrs. In this system there is a Mylar sheet attached to a frame that is secured over the printer table with the board on it. You print onto the Mylar. The table X-Y-theta manual adjustments are u
Electronics Forum | Fri Jul 23 09:17:30 EDT 1999 | Earl Moon
| Dear Jason, | Smart Sonic has over 500 stencil cleaners in operation around the world. The Smart Sonic Stencil Cleaning Process is the only cleaning process that is Certified Environmentally Safe by the Environmental Protection Agency (EPA) and ve
Electronics Forum | Thu Dec 16 15:00:20 EST 2004 | glaucon
Simple differences. Both processes require a very similar machine platform, controlled motion, vision fiducial recognition and alignment of a substrate (PCB or hybrid ceramic) to the "image", the image being either a stencil (hence stencil printing)
Electronics Forum | Wed Jul 29 10:27:01 EDT 2015 | risorse_new
Goodmornin I have a problem with the fixing and move cameras, i don't see the image of the cameras on the screen. On the monitor i see the cross and letter, but i can no see on the black box the camera images. I know the problem is on the ADDA Board.
Electronics Forum | Tue Nov 19 12:36:01 EST 2013 | youngbuck
DEK Infinity-Does anyone have any information on why the automatic screen changer would load the same screen in a different position everytime you load and unload? We constantly have to do a search step for the fiducial and most of the time it will e
Electronics Forum | Wed Oct 08 12:49:37 EDT 2008 | leemeyer
When in the fiducial teach screen check to see if the "Fiducial Data from Autoprogram" box is checked. If this program was not generated from Autoprogram this box should not be checked.
Electronics Forum | Mon Jan 21 08:36:23 EST 2013 | bobpan
The global or image fiducials is set under teach fiducials screen. You will get the option to turn on the one you want. You should choose one or the other depending on what you are building. You are correct for what tep hold,pass and tep vision does.
Electronics Forum | Wed Oct 08 10:54:35 EDT 2008 | stepheniii
Check with your stencil house. At one time I used a Panasonic screen printer with the fiducial camera looking at the top of the stencil. The stencils are cut from the bottom so the fiducials had to be cut all the way through. And the stenicl house wo
Electronics Forum | Thu Feb 18 12:56:18 EST 1999 | Bob Barr
We are using .040" diameter fiducials (global and local) on our boards. They are solder covered and HASL. I get batches of boards where the p&p vision system has trouble reading the fiducial. The fiducial looks dark on the screen. The board vendo
.gif)
