Electronics Forum | Wed Apr 08 05:41:37 EDT 1998 | Alan Pestell
We currently use the Loctite system of Glue/stencils and are getting very good results. You may still have a height problem is you solder resist is too thick. The UK sales person is Bob.goss@loctite-europe.com & he may give you more help. The only ot
Electronics Forum | Sun Jul 26 07:52:35 EDT 2020 | sync40
Hello to everyone, Have you ever experienced soldermask bubbles inmediately after printed the soldermask itself? (for screen printing method of LPISM). I am not talking here about blistering or any outgassing defects after exposing to high temperatu
Electronics Forum | Tue Apr 21 02:28:54 EDT 2015 | dinhhuunam
Juki GL-1.... Any thoughts? I'm New to the > industry and I'm trying to buy a new screen > printer. I have two in mind, DEK and Juki. Hi Sir, I'll advise you the SJ INNOTECH Vision Screen printer Best Solution & Service for You Model HP-520S Hi
Electronics Forum | Fri Mar 04 13:19:43 EST 2005 | Slow Ride
I would use a spot solder machine. If not, why not spray the mask onto the board? Use a Camalot machine or something similar. Using a stencil over placed components wil yield a thick mask - right? That's why I'd spray.
Electronics Forum | Fri Mar 04 11:00:37 EST 2005 | mrduckmann2000
Anybody have any ideas on the proper way to screen solder mask onto a PCB? I am going to cover SMT parts that were soldered to the btm side of the PCB, now I have to mask them in order to run this animal through the wave solder process. I know it w
Electronics Forum | Mon Mar 07 09:49:54 EST 2005 | russ
Duckmann, I was actually asking about using a stencil for the glue.
Electronics Forum | Mon Mar 07 11:20:10 EST 2005 | mrduckmann2000
Russ, I tried to get a screen for glue but the design engineer who laid this board out made up his own rules. The 0402 pads are to close for a proper dot size.....per the stencil house. That is why I am going the solder mask route. I would rather
Electronics Forum | Sun Mar 06 20:12:53 EST 2005 | mrduckmann2000
Russ, I didn't use a stencil for my experiment because I was not sure that the solder mask idea would work. Now that I have treid a few experiments I feel dangerous! LOL. I will not have to use a step stencil, I will just mask all the parts. Lik
Electronics Forum | Fri Mar 04 15:22:17 EST 2005 | russ
Glad to hear a little success from ya Duckmann! i have stenciled mask in the past and I can tell you that stencils are expensive. They are basically a step stencil, you will need full thickness for the area(s) you are going to apply mask and you wi
Electronics Forum | Fri Mar 04 13:22:39 EST 2005 | pr
I believe DEK manufactures stencils that will do this. I'm sure their Apps. engineers could help you with squeegee material etc. good luck, pr
