Electronics Forum | Thu Aug 05 10:38:49 EDT 2004 | iggyslab
Is there a specific epoxy that is most suitable for sealing a polycarbonate chamber, which will have hydrogen flowing through it at no greater than 10psi? Can any epoxy that provides a watertight seal be used for hydrogen applications? We have th
Electronics Forum | Fri Jan 15 09:55:58 EST 2016 | dyoungquist
Mycronic (Mydata) makes a solution for this. Product name is Tape Seal 8 or Tape Seal 1216 Tape Seal 8 - Part No: L-014-1600 Tape Seal 1216 - Part No: L-014-1572 I have used them and they work well.
Electronics Forum | Wed Mar 26 14:25:35 EDT 2008 | coanca
Does anyone know of any other company beside Connor that sells sealing clips?
Electronics Forum | Wed Sep 23 10:42:13 EDT 2015 | ehess
is it necessary to vacuum seal moisture sensitive components? Or can we just seal with desiccant in proper bags?
Electronics Forum | Wed Jan 22 08:23:49 EST 2020 | dgiordano
Thank You! We don't vacuum seal - we just heat seal. The standard doesn't require vacuum sealing, correct?
Electronics Forum | Fri Dec 16 10:25:14 EST 2005 | GS
Hi Liza - polystirene monolayer (blend ?) could be sealed at less presure, ie 35-40 PSI. Temprature could be 165�-170�C. For sure after sealed you shoud make sure the sealing strength (peel strength)should meet min 15-25 N.(bet avg from 25 to 45 N)
Electronics Forum | Fri May 19 08:05:23 EDT 2000 | David
We do a lot of prototype work, builds occur days or months apart and moisture Absorption in IC's is a worry. I would like to bake, chuck in some silica gel and then seal or vac seal in an envelope. Does anyone have any experience of vacuum sealing wa
Electronics Forum | Wed Aug 11 10:28:20 EDT 2004 | Richard Evans
We currently are supplied parts that are moisture sensitive that have high MOQ's even though product volumes are low. These devices are heat sealed by the manufacturer but we have no method to re-seal the packaging to protect the remaning items from
Electronics Forum | Mon May 02 14:59:26 EDT 2005 | Linda Woody
Has anyone experienced electrical shorting between adjacent leads of a ceramic hermatic sealed IC? If so, can you share root cause and corrective action? The shorting appears to be in the glass frit seal itself but the failure mechanism is unknown. A
Electronics Forum | Mon Jan 08 03:16:12 EST 2007 | oswald5087
hi' i need advise on immersion gold PCb shelf life. 1) what is the issue shelf life or expire for Immersion gold PCB? 2) How long we can keep the PCB? (with vacuum seal and without vacuum seal) 2) iF PCB expire, can we bake the immersion PCB? what t
