Electronics Forum | Thu Apr 14 13:49:34 EDT 2022 | winston_one
Thank you for reply, Stephen. No, As I wrote it was leaded process. I heard that it is possible with lead free solder at higher temps an dwell time. At NPL Defect Database I've find this case wich looks exactly the same: http://defectsdatabase.npl.co
Electronics Forum | Wed Oct 15 07:31:29 EDT 2008 | davef
Similar to Jax's comment, concern yourself with the the activity level of the flux. A more active flux would be more aggressive in removing tarnish. Certainly, the choice depends on the type and amount of tarnish. Probably, you need to consider your
Electronics Forum | Thu Jan 29 09:18:36 EST 2015 | davef
Nichrome, manganin, phosphor bronze etc are easy to solder ... the hard part is removing the corrosion * Manganin: 86% copper, 12% manganese, 2% nickel. Often, it's used in making cryogenic measurements, due to its low heat loss. * Select a flux for
Electronics Forum | Mon Nov 27 17:33:25 EST 2000 | Dave F
Ramon: I guarantee you there is corrosion on the solderable surfaces of your board. The issues are: * Flux selected is capable of removing the corrosion at hand. * Processes for applying the flux and soldering the board are effective for the sele
Electronics Forum | Thu Jun 21 21:02:45 EDT 2001 | davef
Yano, at lot this discussion is kinda school boy theory. Other issues are: * Soldering time * Corrosion [did we say that already?] * Safety [ie, personnel, plant, environment] * Cost of ownership
Electronics Forum | Thu Jun 14 22:50:45 EDT 2001 | gregH
Hi, I read an article that says "Flux selection usually depends on the following factors": a) Solderability of pcb base metal or coating b) Corrosivity of vapours and residues c) electrical resistivity of residues d) Ease of removal of residues e)
Electronics Forum | Thu Aug 17 15:13:41 EDT 2006 | samir
I hear Pillarhouse is the "Yugo" of Select soldering! :) Chunks et al is correct that if the innards of the fluxing system are made of non-corrosive mat'ls, you should be okay. I used to deal with the original AT&T Spray fluxers and their spray no
Electronics Forum | Tue Feb 10 18:39:06 EST 2009 | solderq
Quick production (no "pasty" phase) > High joint surface quality > Good flux action > No discolored, corrosive, or substantive residue of any kind > Lead-free is not a concern ;o) Any input/ideas are appreciated. Thanks!
Electronics Forum | Wed Apr 06 11:17:02 EDT 2022 | proceng1
Because it was recommended by the machine manufacturer. Sup 75 is also very corrosive. It basically ruins any tools that touch it if they aren't cleaned properly. I am ordering some of that powder to try.
Electronics Forum | Tue Aug 07 19:32:40 EDT 2007 | davef
Zinc from the brass diffuses into the solder and reacts with tin causing dezincification. Dezincification is a specific type of de-alloying, or selective, leaching corrosion of brass fittings. This type of corrosion selectively removes zinc from th
