Electronics Forum | Tue Dec 11 12:29:57 EST 2012 | deanm
Thanks for the comments so far. The smallest nozzle I've tried is a 4mm, which is what Pillarhouse used on this board to provide a sample. I tried this but wasn't as good as the 6mm. I've soldered the same connectors on a different board using a 10mm
Electronics Forum | Thu Apr 14 13:49:34 EDT 2022 | winston_one
Thank you for reply, Stephen. No, As I wrote it was leaded process. I heard that it is possible with lead free solder at higher temps an dwell time. At NPL Defect Database I've find this case wich looks exactly the same: http://defectsdatabase.npl.co
Electronics Forum | Mon Mar 17 18:37:59 EDT 2008 | aqueous
We manufacture both bulk and localized ionic contamination testers. My answer is from the perspective of the cleanliness testing method. The issue with all bulk ionic contamination testers (Ionagraph, Omegameter, Zero-Ion), is that they test the en
Electronics Forum | Fri Apr 22 14:28:38 EDT 2005 | Gary Goldberg - PROMATION
Low end selective laser soldering systems are limited to what types of soldering can be performed. I have read through the previous comments and find that most have commented on earlier technologies (which do not offer the features today's system do)
Electronics Forum | Fri Apr 22 11:21:42 EDT 2005 | HUH
There are several types of lasers to do laser soldering. Panasonic also has a high intensity light that can solder as well. I've tried em' all and two over whelming things stand out when it comes to this type of soldering. #1 is preheat. It seems
Electronics Forum | Thu Apr 21 10:25:44 EDT 2005 | Fred Saffer
A thorough analysis is in order because laser point-to-point soldering lacks the flexibility of the bottom sided miniwave systems. My experience showed that heating profiles could be grossly affected by color temperature and thermal mass. This can be
Electronics Forum | Thu Apr 21 10:10:44 EDT 2005 | Hiram
Hi all, Does anybody have any comments/experience with a laser selective solder machine? What about Beamworks Spark 100 machine? I appreciate your feedback. Hiram
Electronics Forum | Wed Nov 12 18:00:49 EST 2014 | davef
Look here: http://www.ersa.com/media/pdf/fachartikel/fachartikel_englisch/global_smt_selective_soldering_article_03_2013_.pdf
Electronics Forum | Wed May 03 09:25:45 EDT 2017 | rob
Durastone pallets, we use lots of precision ones for selective wave soldering. An utter nightmare to machine - hideously fibrous. We use http://www.globaldatum.com/ for ours.
Electronics Forum | Mon Apr 25 10:17:22 EDT 2005 | pjc
Here's another supplier: http://www.seicatestsolutions.com/pages/24/A30-Firefly-Solder-Station.php FYI: Contax is a rep firm that sells the MTA system
.gif)
