Electronics Forum | Tue Dec 10 14:10:38 EST 2002 | Randy Villeneuve
Steve, I wave solder most if not all our boards with selective wave pallets. I did not catch if the solder balls were on top of the board or on the bottom but that will make a difference on what to do to get rid of them. Pallets are good and bad. On
Electronics Forum | Mon Jun 25 20:37:14 EDT 2001 | davef
You are 100% correctamundo that the pad on PCB should be the same as the pad on the BGA interposer, but let�s not expend that thinking to the aperture of your solder paste stencil, right away. Generally, paste on large pitch BGA is often 1:1, but as
Electronics Forum | Fri Sep 11 15:27:50 EDT 2015 | u4bga
Hi! We're noticing white spots on 2 PCBAs after the selective soldering & DI Wash processes. ----Facts---- 1) The marking is on all boards, irrespective of date code 2) It only happens on leads that have been selective soldered 3) The pattern of w
Electronics Forum | Fri Oct 04 16:08:28 EDT 2013 | hegemon
Same idea but simpler execution. Verify Solder pot temperature. Verify Temperature of Solder as it leaves the nozzle. Verify preheating gets your PWB up to 90C-120C prior to soldering. Check machine speed, verify 4 seconds contact with solder at
Electronics Forum | Thu May 09 13:49:24 EDT 2013 | davef
First, it appears that your solder mask and your coating material appear to be incompatible. Second, IPA leaves a residue that's probably not compatible with your coating material, either. IPC-HDBK-830 - Guidelines for Design, Selection and Applic
Electronics Forum | Mon Aug 03 08:23:37 EDT 1998 | smd
Stevens Products (supposedly around since 1937) 128 N. Park St. E. Orange, NJ 07019 Tel 973-672-2140 Contact: Ross Stevens, Jr. They'll take a PO but terms are net 30 Right now we are taping the goldfingers which is | effective but also expensive. A
Electronics Forum | Mon Feb 22 05:39:58 EST 1999 | Scott Davies
We are currently using circle, cross and double-cross(#) fiducial patterns with SiPlace equipment. Most of the problems seem to occur when, in the case of a HASL fiducial mark, a PCB is topside reflowed, goes away for thru-hole and comes back for bot
| 1 |
COT specializes in high quality SMT nozzles and consumables for pick and place machines. We provide special engineering design service of custom nozzles for those unique and odd components.
2481 Hilton Drive
Gainesville, GA USA
Phone: (770) 538-0411
winsouce.jpg)