Electronics Forum | Tue May 11 08:33:55 EDT 2004 | pjc
here are some selective soldering system suppliers: http://www.seica.com/en2/a30firefly.html http://www.speedlinetech.com/electrovert/selectra.aspx http://www.myselective.com/itf/mys/homepage.nsf/web/index.html http://www.seho.de http://www.
Electronics Forum | Fri Jan 23 16:11:38 EST 2015 | rgduval
Charlie, For the 300 cylinder (the largest Airgas sells), it's going to cost about $66/cylinder for the gas (plus delivery charges). They also charge a $99/year lease for the cylinder. Based on those costs, and a low-end N2 generator system that I
Electronics Forum | Fri Jan 23 12:34:28 EST 2015 | dyoungquist
Our nitrogen generator and an air drying unit came with the selective solder machine when it was purchased new in 2008 as a package deal. We originally were feeding the system with air that was not properly dried. That lead to some maintenance cost
Electronics Forum | Wed Nov 27 13:07:07 EST 2013 | processman
Hi, Can somebody confirm the correct operation of the rear clamp rails on an Ersa Ecoselect 2.... Do they only activate when the PCB comes into the machine then release, or stay activated thru out the flusing, heating, soldering etc
Electronics Forum | Fri Apr 22 14:28:38 EDT 2005 | Gary Goldberg - PROMATION
Low end selective laser soldering systems are limited to what types of soldering can be performed. I have read through the previous comments and find that most have commented on earlier technologies (which do not offer the features today's system do)
Electronics Forum | Thu Nov 13 12:49:45 EST 2014 | dyoungquist
I have no experience running a "move the board" selective solder so can not compare the 2 methods..... We have been using an RPS Rhythm "move the pot/nozzle" system since 2008. We are using it solder thru hole components onto boards that often have
Electronics Forum | Fri Apr 22 16:57:10 EDT 2005 | davef
Suppliers are: * Contax Ltd Little Park Farm Road Segensworth West Fareham, Hants, PO15 5SJ UK +44 1489 885808 Fax: +44 1489 885553 * Leister Process Technologies Riedstrasse Sarnen LCRN, 6060 Switzerland 011-41-416627467 Fax: 011-41-416627480 * mt
Electronics Forum | Mon Jan 14 02:22:51 EST 2008 | ilona
David, why not contact the current suppliers of selective soldering systems for a copy of their layout specs? Surely we all would be interested to provide potential customers with the info they need to evaluate a process applicabilty or to design bo
Electronics Forum | Tue Dec 03 14:05:09 EST 2013 | chadsuckow
You can have it either way. In each program you can select to have the side pressure active for the entire program. The factory setting is to have it release immediately after it pushes the pcb against the fixed rail.
Electronics Forum | Thu Jan 27 11:33:59 EST 2005 | russ
For what you have right now I would recommend that you use soldering iron tips that are made for component removal. until you get BGAs I wouldn't worry a whole lot about the expensive rework equipment. I would use specialty tips and a heat gun wit
.gif)
