Electronics Forum | Fri Dec 15 14:22:22 EST 2006 | realchunks
Sure. Treat it like wave solder. Top side wetting is generaly harder to achieve than wave so don't over look it. On most selective solder machine, the delta-T is also something to look out for. Most move from preheat to pot. And snce the pot por
Electronics Forum | Wed Dec 19 09:24:21 EST 2012 | swag
Many times we manually add flux from the top side for good fill.
Electronics Forum | Thu Oct 31 02:43:55 EDT 2013 | hqew2013
The smallest finished hole available for 2 layer board is .020”. The smallest finished hole available for 4+ layer board is .014”. All holes are round and drilled through from top to bottom layer of board. No blind or buried vias. For holes = .15
Electronics Forum | Wed Sep 01 13:58:10 EDT 1999 | Dave F
| Is it feasible to have one type of board carriers to take boards thru 1) glue curing process for first side and 2)invert carriers with boards, and 3)reflowing second side, and 4) do manual stuffing of th components and 5) take them thru selective w
Electronics Forum | Fri May 23 18:55:20 EDT 2008 | gregoryyork
This is one of the biggest mistakes with the Lead Free process. We have all listened to the 'industry experts' and followed their advice and unfortunately got it wrong. Keep the dwell times (dependant on alloy selection) the same as Leaded so you are
Electronics Forum | Thu Aug 17 12:38:57 EDT 2006 | finalassy
What type of water soluable flux are you running in you selective solder machines? I know that we had to replace the ruby that the solder shoots through at the top of the fluxer once because of crystalization. That was not a cheap replacement. Doe
Electronics Forum | Fri Jul 15 06:50:02 EDT 2005 | Rob
It looks like the 330 Convection & the GF120 ovens would really stuggle to do lead free, with 3 zones (the 330 has 3 top, 1 bottom). Can't comment on the 545 oven, you'll have to get them to run profiles with a selection of your boards & check on
Electronics Forum | Tue Feb 21 12:28:17 EST 2023 | tommy_magyar
Hi there, I am using Inertec selective soldering. We do 8 hr shift, 5 days a week, lead-free at 300C - changing nozzles once in 4-6 weeks. Regards, Tom
Electronics Forum | Thu Jun 27 03:03:57 EDT 2019 | SMTA-David
Hi, I have a small assembly line that consists of a Semi-Automatic Stencil machine, a Samsung Pick and Place, a small IR reflow oven and a wave soldering machine. The reflow oven is presenting the biggest bottleneck. The machine is a small IR (T960
Electronics Forum | Mon Sep 25 07:47:14 EDT 2006 | egrice1@wi.rr.com
Take a look at ERSA. German company with many years experience in lead free soldering. Also have the top Selective Soldering system in the business.