Electronics Forum | Tue Jan 12 14:59:14 EST 1999 | Earl Moon
| What would be a good metric for process control of a stencil printer? (fully automatic, vision equipped, stendil printer). | I'm doing some more DEK 265 GSX's with everything imaginable hung on them. Have done Lt's and the MPM2000. This makes mach
Electronics Forum | Mon Aug 12 13:11:47 EDT 2002 | pjc
I am not a DEK user but have some knowledge of the ELA to share. The ELA has some structural differences with the Horizon and Infinity models. It is DEK's low-end automatic printer (a cost-reduced version of the Horizon model)and is manufactured in C
Electronics Forum | Thu May 24 12:25:18 EDT 2012 | markbrawley
While buying a used printer may seem like a good value up front, you may be taking risks and making unnecessary compromises that will cost more in the long haul. The perceived cost savings of a used machine may quickly dissolve when you consider som
Electronics Forum | Tue Jan 12 19:07:07 EST 1999 | Earl Moon
| | For process management with SPC of the stencil printing process with a fully automatic stencil printer, what process outpur parameter would you recommend for SPC? | | | | It appears to me that there are two options: | | A: to have a pn chart bas
Electronics Forum | Tue Jan 12 21:42:33 EST 1999 | Jon Medernach
What's important in stencil printing (which differs from screen printing) is providing a consistant volume of paste at each interconnect. The process window varies in proportion to the pitch. More than 60% of all defects are related to solder depos
Electronics Forum | Thu Aug 10 12:55:33 EDT 2017 | stephendo
I WAS a huge fan of fully coded part numbers. One customer had some part numbers that must have been over 30 characters(maybe some over 40) long and some about 6 or 7. PTH parts can be the worst because it seems like back in the day a 1N4001 was a 1
Electronics Forum | Wed Jun 27 21:24:47 EDT 2001 | davef
Welcome. First, proper alignment can produce an order-of-magnitude increase in the number of boards that can be printed without wiping. The initial alignment can be made either by: * Peering through the stencil apertures at the board underneath and
Electronics Forum | Thu Jul 29 15:44:29 EDT 1999 | Earl Moon
| Thanks Earl for your insight! I sometimes feel conspicuous as one of the few women I've seen frequenting this board, but everyone's been helpful and has resisted the overwhelming temptation to pat me on the head. | | From what you and some of the
Electronics Forum | Thu Jul 29 21:00:27 EDT 1999 | Dave F
| Thanks Earl for your insight! I sometimes feel conspicuous as one of the few women I've seen frequenting this board, but everyone's been helpful and has resisted the overwhelming temptation to pat me on the head. | | From what you and some of the
Electronics Forum | Wed Apr 21 12:01:22 EDT 1999 | jseagle
| To all who will be potentially my salvation, | | I am currently researching Polyimide stencils for possible use and manufacture. If I may be indulged - with due reference to all past enquiries and notes on the subject - can anyone offer an up to d