Electronics Forum | Thu Jun 04 16:01:57 EDT 1998 | BOB
| My company recently purchased 3 new Phillips CSM machines and is interested in buying a Screen Printer. The one problem we have is that we have to change setups three to four times a day. Due to the small runs of one type of boards that we do. My
Electronics Forum | Thu Jun 04 16:00:53 EDT 1998 | BOB
| My company recently purchased 3 new Phillips CSM machines and is interested in buying a Screen Printer. The one problem we have is that we have to change setups three to four times a day. Due to the small runs of one type of boards that we do. My
Electronics Forum | Fri Jun 05 12:57:20 EDT 1998 | Steve Schrader
| My company recently purchased 3 new Phillips CSM machines and is interested in buying a Screen Printer. The one problem we have is that we have to change setups three to four times a day. Due to the small runs of one type of boards that we do. My
Electronics Forum | Fri Mar 16 11:52:31 EST 2001 | J.D. of Panasonic
Ed, You certainly are ready for some equipment. I noticed in your message that you mentioned cost three times. So it is a very big issue to you. What everything depends on is where you see your company going in the next few years. Do you want
Electronics Forum | Sat Sep 23 15:13:40 EDT 2000 | Francois Racine
Hi Sophia, I`m responsible of SMT line and we solved this problem with a complete automatic solder paste printer machine. In the past we had problem with off alignment and solder height too.... at that time we used a semi-auto printer machine and w
Electronics Forum | Mon Jul 29 08:28:05 EDT 2002 | pjc
Start killing DEK now, on the ELA. All DEK 248 semi-auto printers have been built in China for quite some time (years). Its shipped to the UK from China. All DEK ELA models are now built in China, since 01 some time. Thats the fact Jack. All MPM mod
Electronics Forum | Thu Jul 15 14:09:23 EDT 1999 | MMurphy
| | I use a Transition Automation Semi- Automatic stencil printer with laser cut frameless stencils. My solder paste is an SN63/PB37 RMA 291. I do not operate with in a controlled humidity enviroment. The room temp generally runs around 70 deg's but
Electronics Forum | Fri Jul 16 06:22:31 EDT 1999 | Wayne Sanita
Mark, I had the same peoblem. For my stencils i use a 15% reduction for the width of fine pitch leads only, as Earl said follow the 1:1.5 standard. We consider pitches of 32mil and under. We also clean the stencil every other board to ensure no caki
Electronics Forum | Tue Jan 12 16:16:21 EST 1999 | Sanjay Bhatikar
For process management with SPC of the stencil printing process with a fully automatic stencil printer, what process outpur parameter would you recommend for SPC? It appears to me that there are two options: A: to have a pn chart based upon the % of
Electronics Forum | Tue Jan 12 17:56:18 EST 1999 | Jason Hall
| For process management with SPC of the stencil printing process with a fully automatic stencil printer, what process outpur parameter would you recommend for SPC? | | It appears to me that there are two options: | A: to have a pn chart based upon
