240 seperator results

Electronics Forum: seperator (Page 1 of 24)

Solder Saver

Electronics Forum | Fri Jun 04 08:29:27 EDT 2004 | Cal

We use the Kester Solder saver here and seems to work well. on a side tangent Technical Devices has a Solder seperating machine used to seperate dross from the solder. I am pretty sure they use heat and pressure to seperate the two. www.technicalde

Fiducial replacements?

Electronics Forum | Tue Dec 18 22:20:54 EST 2007 | darby

Paul, For the Dek and following equipment - seperate all the "bad fid" pcbs and process them seperately. Drill a hole as accurately as you can through the bad fids making sure you leave some white area around them. Set up and run a seperate program u

Hand Soldering-Mixing Sn63 and L-F Processes

Electronics Forum | Tue Aug 09 06:21:19 EDT 2005 | bwet

Ladies and Gents: There have been several ways discussed in the trade press and in papers re: how to seperate/keep seperate Sn63 and l-f hand soldering tools. Some claim comepletel seperate hand soldering tools are required, while others claim that

Panel/Pallet Separating with Interconnects

Electronics Forum | Sat Jul 13 09:00:44 EDT 2002 | davef

One of those pick your poison things, eh? * Reduce tester time and labor versus not testing the board after seperation from the panel * Traces that connected to the common bus will have exposed copper after seperation from the panel. This is not rec

Quad Autoprogram Help Needed

Electronics Forum | Thu Oct 23 10:59:58 EDT 2008 | leemeyer

I am running Autoprogram ver. 5.31 and need to split a large program so that it can run on 2 seperate Quad 4C assemblers. When I generate the program I select the "Breakup Program for Seperate Central Controllers" box but I do not get 2 seperate prog