Electronics Forum | Tue Nov 01 16:09:38 EDT 2022 | kamedatec
The machine had the Auto Tray installed but was removed to put here in the company because the machine was bigger than my elevator. The owner told me it was working, which made me waste time testing all possible settings, electronic cards and cables.
Electronics Forum | Wed Aug 17 10:39:13 EDT 2005 | Allen
We recently took on distribution of DekTec in the USA, that is to say we market, sell and service the gear. The notion that all equipment coming from Asia is cheap is a misconception. Many of Dektec's current customers are names we know as tier one O
Electronics Forum | Mon Oct 23 10:46:58 EDT 2006 | Steve
I know Mydata has machines that have a 44" X 32" placement area, reflowing something that big is another story. Most reflow ovens I know of have a maximum conveyor width of 20", although Heller ovens can go 23.5" wide. If you're into Vapor Phase sold
Electronics Forum | Wed Feb 20 11:40:31 EST 2019 | bmalhi
Heller Oven comes with a profile pre-loaded so you can start there. RTS = Ramp to Spike. Basically a straight line from preheat to spike. Also known as “Tent” profile RSS = Ramp Soak Spike. This one creates a flat line around 150-180 degrees on th
Electronics Forum | Fri Oct 19 16:02:20 EDT 2012 | davef
Hi Phil ... Here's a response from Heller Industries ... If I understand correctly you want to tight the tolerance window between set point and present value. Actually you can do so by lower down the warning band to 5C which is default 15C. Please
Electronics Forum | Mon Sep 28 09:31:43 EDT 2015 | proceng1
Proc > > My field service back ground included > Electrovert so I know reflow electrical quite > well. I've worked on Heller, Conceptronic and > Vitronics over the last few years and really > there isn't a huge difference if you can read a > sc
Electronics Forum | Sat Feb 07 22:03:25 EST 2004 | Dean
I have run into this before with a P&P machins. In one instance the 4 levels of passwords were published in the first revision manuals. OK, guess tech editors missed that??? FYI Anyways, I just wanted to mention that changing or altering software
Electronics Forum | Thu Aug 16 08:15:04 EDT 2018 | muzzy
Hello! Does anybody know how to access the "MS Parameters" window on older JUKI Pick and place machines? (mainly on 730, 740, 750, 760). Service manual mentions that it is possible to change all of the mechanical parameters from there (like for examp
Electronics Forum | Fri May 10 01:30:15 EDT 2024 | nicholascarson
Access the Calibration Screen: Navigate to the system settings menu on the HMI and find the calibration option. This may require entering a password or accessing a service mode, depending on the machine's security settings. Begin Calibration: Once
Electronics Forum | Tue Feb 17 13:47:33 EST 1998 | Chrys Shea
| I am currently evaluating some different reflow ovens | for a future purchase. The manufacturers we are | looking at are Conceptronic, BTU, and Heller. Any | feedback on these manufacturers would be welcome. | I am particularly interested in: | 1
Reflow ovens for automated SMT PCB assembly, specializing in lead free processing and nitrogen reflow. The best convection reflow ovens on the market.
4 Vreeland Rd.
Florham Park, NJ USA
Phone: 973-377-6800