Electronics Forum | Tue Oct 07 13:01:48 EDT 2014 | charliedci
does anyone have experience with reflow of Micro SD cards to PCB@ lead free temps?
Electronics Forum | Fri Feb 22 15:38:48 EST 2019 | tsauve
Anyone have experience (good or bad) directly reflow soldering microSD card (Pb-free) to PCB. asking for a friend :)
Electronics Forum | Mon Sep 23 01:42:35 EDT 2019 | sssamw
yes, socket on PCB, SMD type
Electronics Forum | Mon Sep 23 11:13:12 EDT 2019 | tsauve
I forgot to update this. Customer insisted on reflowing SIM card directly to PCB, as per their previous CEM. It worked. No deformation of the SIM card - assembly works - records data to SIM card. Note that using hot air reflow type (rework station)d
Electronics Forum | Tue Sep 18 14:44:09 EDT 2012 | gregp
Hi Joe, Versatec acquired the assets of Contact Systems back in 2009. We service and support all Contact Systems machines. We have 61 Falcon cards in stock. Contact support@versatecsolutions.com for more details. Greg Pompea Versatec
Electronics Forum | Tue Oct 25 07:32:12 EDT 2005 | prakash
My company provide service in terms of repairing the cognex vision card used in the Dek 265 GSX and 288 machines, and certain MPM and Camalot machines. I believe the Gemini II uses the 5000/5200 series vision card. Do contact me if you're interested.
Electronics Forum | Tue Oct 18 14:38:47 EDT 2016 | muzzy
Just for a future reference: we managed to fix our machine. The problem was related to hard disk drive, we had to replace HDD, expansion card for HDD and motherboard. They were all fried, probably due to some kind of voltage spike. The LEDs itself ha
Electronics Forum | Wed Oct 29 18:08:35 EDT 2014 | tombstonesmt
Good afternoon. Not sure if this is available at an engineer level. Perhaps and SD card with field service access is necessary. We have two lines with NPM-W's and the most we've been able to do is actuate vacuum on the heads during flow checks.
Electronics Forum | Sun Jun 30 20:46:20 EDT 2013 | kumar_antom
HI there, I am having problem on the solderability for the fine pitch lead on SD card holder on this pcb.Have tried different kind of temperature settings on the reflow but the problem still occurred.Pls refer to the attached pictures.And when i jus
Electronics Forum | Mon Jul 01 19:57:01 EDT 2013 | kumar_antom
And this process is using a kind of ceramic jigs..... Does this jig absorb much heat that does not dissipate enough heat to the SD card pins ? Thanks
WINTECH provides new/used/pre-owned SMT, AI & PCB Assembly (PCBA) equipment of various brands. Also supply service, modification & original or local-made spare parts. We are also an appointed agent for well-known brands.
Equipment Dealer / Broker / Auctions
NO. 1 LORONG SAGA JAYA 6
PERAI, 09 Malaysia
Phone: 6043809899
