Electronics Forum | Tue May 23 21:03:18 EDT 2000 | Dave F
David: Beyond the information on sealing components in the archives, look for information on protecting boards. Further, consider a dessicant cabinet, as an alternative. Sources are also in the archives. Good luck. Dave F
Electronics Forum | Sat Feb 28 14:00:18 EST 1998 | Gary Simbulan
I have run across reference to EIA-481 for specifications on Tape And Reel components for automatic placement and am looking for something similar that specifies standards or dimensions for IC Tubes or sticks. I am trying to make the vibatory feeder
Electronics Forum | Thu Mar 19 17:02:50 EST 1998 | TaeDong Park
| I have run across reference to EIA-481 for specifications on Tape And Reel components for automatic placement and am looking for something similar that specifies standards or dimensions for IC Tubes or sticks. I am trying to make the vibatory feed
Electronics Forum | Wed Feb 22 08:31:42 EST 2006 | davef
Q1 Are there any standard regulating the subject? Very few infos found on IPC. A1 We�re unaware of standards for packing and storage for most types of boards. * IPC 4553 standard for Immersion Silver Finish, 3.8 Packing and Storage. * J-STD-033 and E
Electronics Forum | Fri Apr 25 10:12:08 EDT 2014 | rgduval
Whatever software was used to create the drawing that you shared should be able to indicate pin 1 of the devices. If it is based on the CAD information, there should be a setting somewhere to turn on pin-1's. If that drawing was created manually, t
Electronics Forum | Thu Dec 23 22:31:47 EST 1999 | Vincent Chen
Hi!Charlie, 1.Are you retrofitting your spray fluxer in your wave soldering machine? If you are, please ensure that you have a air knife just before the preheater!Fluxe fumes tends to accumulate and that could be dangerous if your air exhaust is not
Electronics Forum | Wed Aug 09 09:43:31 EDT 2023 | boyabandaoti
Semiconductor is the material to make various electronic devices; The integrated circuit is the electronic device, that is, a certain process is used to make the crystal tube, resistance, capacitance and inductance in a circuit and the connection of
Electronics Forum | Mon Feb 21 16:06:10 EST 2005 | MR
I agree w/ JB; the package height definition is crucial. I have had problems w/ this in the past, and found that a resistor height was being used as a universal passive height for the capacitor in question. Properly defining the height fixed the pro
Electronics Forum | Thu Dec 19 11:30:11 EST 2002 | russ
What temp. are you planning on baking them? If this is long term process I would recommend that you hav trays made out of an appropriate ESDS material that can withstand your bake temp (such as duropol)for your QFPs. You can have several patterns/pa
Electronics Forum | Tue Apr 09 21:57:42 EDT 2019 | alexvolovich
If you were able to do a first/last part, then your tray wagon is set-up. You need to go to Tray Types and program the tray that will match the piece of tape you have. Then you should be able to add your component to the tray wagon.
