Electronics Forum | Wed Nov 17 09:51:25 EST 2004 | AS
I'm looking for advise on setting up a prototype station for smt (we are currently outsourcing smt production, but have a need for rapid in house prototyping). The station must be able to handle only single sided boards with components no smaller th
Electronics Forum | Tue Dec 19 09:55:16 EST 2006 | bsteffen
If you call up Universal tech support at 1-800-842-9732, any of those guys or gal would email you the schematics to the MPUP feeder setup station.
Electronics Forum | Fri Jun 03 09:23:48 EDT 2016 | designhaus
Thank you for the great feedback. We're definitely taking all of these into consideration. Currently, we're shooting for the following: - JTAG Testing setup - Rework station - A hot air rework station - A quality microscope/vision system Have
Electronics Forum | Mon Jun 18 10:27:26 EDT 2001 | floydl
We have a modest operation and are seriously considering adding x-ray inspection systems. How much will it cost to setup an X-Ray Inspection Station? What training resources are available? What can we expect to spend to train inspectors?
Electronics Forum | Wed May 09 09:54:01 EDT 2012 | swag
We build all our stuff in "kits" as you describe. We don't have much trouble running short on parts at the end although most of our equip. is new which helps a lot. We also have feeders that can run in reverse on set-up stations and we reload parts
Electronics Forum | Fri Jul 19 10:01:30 EDT 2013 | dontfeedphils
In a past life I ran F1 systems post placement / pre reflow behind a MyData My12E, so it didn't exactly have to keep up with a speedy chip shooter, but it did pretty well. The AOI would end up being the bottle neck some of the time, but not because
Electronics Forum | Mon Oct 24 13:17:18 EDT 2022 | micropak
I have successfully used "Offset" in pick position on a particular feeder/component on F3. My L/C is Linux 503.04 and SC software is probably 010 (RMOS). This 406, you are mentioning as Station software ? I believe you have to do it in feeder setup,
Electronics Forum | Thu Nov 24 01:45:44 EST 2005 | pavel_murtishev
Good morning, My advice is to put two Topaz-Xii in line. Machine programming is rather easy (with PPS and GPP that AssemleOn offers), but final teaching on machine is strongly required. If you want to prepare programs fully offline you�ll have to pu
Electronics Forum | Mon Jun 02 15:03:05 EDT 2014 | clydestrum
Background on the PCB: Thickness: .032" Material: Standard Fr4 V-score: Leaves .016" (approx .008" cuts on either side) We are having some issues on these boards where the edges are delaminating all the way to the copper during de-panel. Now, we are
Electronics Forum | Wed Feb 02 16:29:43 EST 2011 | remullis
I can explain our kitting process which was heavily software managed. For our Chipshooters we grouped setups of the optimum algorithym for less carriage movement, and grouping part numbers as much as possible. This was done with some high dollar sof
