Electronics Forum | Tue May 29 15:00:15 EDT 2001 | surteess
Sorry guys but you missed the point - I am looking at thicknesses for SPRING contacts - such as the ones used in the telephone plugs that fit into the wall socket, I cannot find a telecom standard - hence thought some PCBers might be able to shine a
Electronics Forum | Fri Jun 07 12:58:43 EDT 2002 | Hussman69
In that case, one 40 watt bulb should do. Hung very high from the roof and no shine on the floor.
Electronics Forum | Sat Jul 02 06:19:01 EDT 2005 | Dhanish
My customer feedback they found one board with cold solder on the BGA ball.I looked at the picture,the ball looks very shining but I dont think that is a cold solder.What is the method can be used to confirm the colde solder beside cross sectioning t
Electronics Forum | Fri Mar 02 12:54:46 EST 2007 | oldsmtdude
They do make smt leds that mount topside over a hole and shine down ya know. Then just kapton tape the holes and wave it.
Electronics Forum | Tue Oct 09 06:14:48 EDT 2018 | bobpan
Move the camera over a feeder position and shine a flashlight to see if the image improves.....if it does....your light ring needs replaced or the led's need replaced in it. Sometimes just re-adjusting the angle of the led's in the ring can help. Go
Electronics Forum | Mon Dec 03 08:57:14 EST 2018 | robl
Sounds like bent rails. Do you have a laser pen you can shine down both sides of both rails to see if there is any curve?
Electronics Forum | Thu May 10 08:56:38 EDT 2001 | stefwitt
I think the main purpose of cleaning a fiducial is not to make them nice and shine, but to get a haze on them. In particular dome shaped fiducials create too much reflection from the light source and distort the image. The eraser pencil is a bandage,
Electronics Forum | Wed Oct 15 19:11:40 EDT 2003 | dlkearns1
Can also reduce leaching of certain types of components. Also, dont expect to see a "shiny/bright" joint if running Nitrogen in the relfow unit, you'll see a dull/smokey like joint...if running Air then sure,let SHINE! my 2Cents DaveK
Electronics Forum | Mon Jan 26 11:10:56 EST 2004 | samaniegocesar
Hello to all of you, I'm running some small pcb's about 2.5x3.5 inches, can somebody tell me the zone temps and speed in meters/min that I have to use to get the best solder paste shine and best quality, is an oven of 8 zones. I apreciate your suppor
Electronics Forum | Sun Apr 03 20:10:06 EDT 2005 | smtuser1234
You better get to know who the third party service companies are because Fuji just does not care about service they rely on their reputation. If you wanted good service you should have gone with Universal. When you compare machines now days all of th
