Electronics Forum | Mon Mar 01 16:11:03 EST 2010 | kjs123p
I have Siemens F4 and S20 machines. Does anyone know of a spare parts supplier for these machines besides Siemens? Thanks in advance for the replies.
Electronics Forum | Wed Apr 30 03:30:15 EDT 2003 | chrissieneale
Herman, LVHM is exactly what we have always done with our SMT machine. We use the Siemens 80F4 auto pick and place and have a HUGE set-up time for each run. And attrition problems (though i'm finding they are packaging related rather than machine rel
Electronics Forum | Wed May 17 03:00:45 EDT 2000 | Avichai Ramot
I have shifts in the placement of qfp240 components. I have this problem with al my IC machines: Fuji-Ip2,Ip3 ,siemens F-4.
Electronics Forum | Tue Mar 27 10:37:32 EDT 2007 | dphilbrick
High mix low volume I would say Mydata would be a good choice, If set up time isn't a big factor I would choose Siemens F4 for reliably, serviceability and OEM support.
Electronics Forum | Thu Apr 05 16:03:38 EDT 2007 | beentheredonethat
Definitely recommend the Siemens F4/5 machine for your application. Based on experience I can say placement accuracy/repeatability is DNO (that�s Dead Nuts On). Good luck.
Electronics Forum | Tue Mar 27 10:33:55 EDT 2007 | dphilbrick
High mix low volume I would say Mydata would be a good choice, If set up time isn't a big factor I would choose Siemens F4 for reliably, serviceability and OEM support.
Electronics Forum | Tue Feb 14 17:52:58 EST 2023 | mnorthey
We have 3 S20's and an F4 and about 150 Hover Davis Feeders. Is there anything you might need to keep your machines operational? We are looking to sell all of the machines.
Electronics Forum | Mon May 21 20:55:19 EDT 2001 | dougk
We have both CP 4/2's and 4/3. We're also running Siemens S20's & F4's. The 4/3's vision is more temperamental and slightly harder to program. Machine startup and nozzle centering takes longer, but placement time is slightly better. Honestly, for wha
Electronics Forum | Tue Aug 25 16:46:48 EDT 1998 | Bill West
| | | I am considering of Philips FCM for the next production. Jim, I think I would take the Phillips machine over the Fuji also, but have you looked at the Siemens F4 or F4/6. We are a Siplace house here, and we have been very happy with the equip
Electronics Forum | Fri Feb 01 11:17:21 EST 2019 | youngbuck
Hi, Make sure to check any cracked, pinched, kinked hoses. Also when taking the whole gantry off there are clear hoses that can get pinched. Also, may want to changed the vaccum measuring board. Is this a S20 or F4,f5 or hs50 Thanks,
