Electronics Forum | Mon Feb 01 08:04:37 EST 2010 | richc7799
Does anyone have available the original specifications for the Siemens F3 with tray unit.
Electronics Forum | Wed Aug 10 11:41:50 EDT 2005 | tommyttr
Try a Siemens F3, if you can find one. They don't spec 0402's but it can easily place them.
Electronics Forum | Fri Sep 23 03:52:41 EDT 2005 | dougs
Hi, Does anyone know if it's possible to place BGA's with pitch 0.5mm and ball diameter 0.25mm on a siemens F3. the manual says that smallest pitch on BGA's is 0.56mm. Siemens won't commit a yes or no, as you'd expect, but i'd have thought it w
Electronics Forum | Fri Feb 10 09:27:53 EST 2006 | Loco
You could try Berotek. We've had good experiences with them in the past. http://www.berotek.com
Electronics Forum | Thu Apr 13 12:58:49 EDT 2006 | caldon
Hi Brian- All is well on my end. I have not been to SMTNET in a long while but pop in from time to time. Working here at Agilent gives me more of an opportunity to check in. How are things on your end? Where are you working these days? Cal
Electronics Forum | Tue Apr 11 15:23:43 EDT 2006 | Cal
Hi Shawn- If I can remeber....from my Siemens Days on the S15 or F Series Once you send the program over to the machine from the line computer...You can not skip. Remember, these machines in theory are not ment to stop running (i.e. Thus the feeder s
Electronics Forum | Tue Apr 11 11:40:41 EDT 2006 | global
We have a Siemens S15 and an F3, which we have only had now for about 4 months. We have an old line of HS180s and an SP120 and have found that the S15 and F3 do not have the option to skip a part if one runs out during placement. We from time to time
Electronics Forum | Tue Apr 11 15:37:31 EDT 2006 | stockley
(Hey Cal how you doing?) I can't resist this. You can sort of do what you're hoping for but you have to be very careful. Let the component run out and let the machine get as far as it's going to go. Then go to "Software Options", "Test commands" then
Electronics Forum | Sun Mar 07 05:32:41 EST 1999 | Oukai
I have used Siemens placement machine for four years,from MS-102 to Siplace 80S13,Siplace 80S15 and 80F3,by my opinion,i think siemens is reliable,machine runing is stable,maintainance is very simple,our new 80S15&80F3 were buyed in Dec 1997,they onl
Electronics Forum | Wed Jan 09 14:05:58 EST 2008 | edmneb
We recently acquired a Siemens Siplace F3 and a S15 machine, and I am having a few problems with the machines. We have always been a Universal shop, so I am not really familiar with the Siplace machines, and need some help from all of you folks out
.gif)
