Electronics Forum | Wed Nov 03 03:26:38 EST 1999 | Wes
We have Siemens S-20 machine whose other gantry occasionally missmounts all its components in Y-direction(approx. 1/2 mm ). Most of the missmounts happens when there is a lot of 0603 or 0805s (B-side glue boards). Gantry picks up the components OK bu
Electronics Forum | Tue Apr 18 04:54:30 EDT 2006 | bayanbaru
We are using Siemens pick and place machine for chip placement. Our goal is to continuous production during component replenishment. In Siemens machine, the feeders that can be removed, reloaded, and placed back on the machine while the machine is ru
Electronics Forum | Thu Jul 29 13:56:16 EDT 2010 | garciaga
Siemens recommended Special nozzle-03070148 and provided GF to place this component using Siemens s-25/27. It worked fine in the beginning but after a while we saw droppage. So we moved the set-up to F5 machine which is slower. Their recommended G
Electronics Forum | Wed Jul 19 11:18:04 EDT 2006 | fabione
Goodday,my name is Fabio and i'm smt tecnician manager of an italian company i must buy a NEW line smt. My end choose is: europlacer(Vitesse) or Mydata(My9+My9) or Siemens(CS+CF). if it's possible i would a yours considaretion about affidability and
Electronics Forum | Thu May 30 14:22:58 EDT 2002 | Ozzy
For 0201 placement Siemens can also use the fiducial camera to locate the actual tape pocket and use it as the fiducial. First time pick rate is greater than 99.9% for 0201 components.
Electronics Forum | Wed Apr 30 07:19:20 EDT 2003 | stefwitt
You did not tell us which brand machines you are using. I do assume that you mean the feeder position recognition of the Siemens machine. Did you ever re-teach the fiducial # 250 and 251? Can you narrow your problem down to some particular feeders?
Electronics Forum | Mon Dec 04 11:54:51 EST 2006 | GS
Do not forget Siemens placers who have un important market portion of the whole Pick and place arena. But as SaiWong says, it depends in which part of the World you are interested to investigate. Regards.....GS
Electronics Forum | Thu Dec 07 10:16:31 EST 2006 | James
Shocked ! Are you kidding. As a percentage of all of Siemens revenue you've got to get out the microscope to find what the pick and place machines are bringing in, not to mention profit margin. I would bet its the dog of the whole corporation.
Electronics Forum | Tue Mar 27 10:37:32 EDT 2007 | dphilbrick
High mix low volume I would say Mydata would be a good choice, If set up time isn't a big factor I would choose Siemens F4 for reliably, serviceability and OEM support.
Electronics Forum | Thu Apr 05 16:03:38 EDT 2007 | beentheredonethat
Definitely recommend the Siemens F4/5 machine for your application. Based on experience I can say placement accuracy/repeatability is DNO (that�s Dead Nuts On). Good luck.
