Electronics Forum | Wed Apr 08 04:29:14 EDT 2009 | kircchoffs
Hi Rodrigo, is your problem occurs only at 2nd device table? how about if you transfer the feeders to the 1st device table? if it happens at both device pls your part data if there's a value at pick-up. you can also check the proper data of the de
Electronics Forum | Tue Apr 07 12:47:09 EDT 2009 | rodrigo
Hi All, Our CP6-4000 machine has this weird issue that happens once in a blue moon and only on table two. Lets say it is going to pick up a part from feeder 10. Well, it doesn't stop at the right position. It is slightly off so the thing pushing dow
Electronics Forum | Wed Apr 08 10:19:19 EDT 2009 | cyber_wolf
Go into the program screen at the machine and look at the device offsets. See if there is an offset for the feeder. I have also seen a bug on CP4 machines that is like what you described. Switching to the camera view corrected it. (wide/narrow)
Electronics Forum | Wed Oct 13 09:15:36 EDT 2004 | Tarheel
I am looking for some used Siemens feeder tables. Preferrably the tables that roll for the S-20/S-23 series machines.If anyone finds some them please let me know !!! Thanks......
Electronics Forum | Mon May 12 15:08:11 EDT 2003 | stefwitt
1. Not quite. The width of 16 mm came most likely from the reel width, which can be up to 15 mm wide for the 8 mm tape. The reel for the 12 mm tape is up to 18 mm wide and would occupy already two slots. If you design a machine from scratch, I would
Electronics Forum | Sat Oct 17 08:03:47 EDT 1998 | Stefan Witte
I think the Universal and the Siemens machine are a good marriage. However, dealing with two different vendors may create additional difficulties. As both parties want to make the deal with you, you might want to bypass the sales people to get more i
Electronics Forum | Mon May 14 16:39:38 EDT 2001 | T.F.
Siemens makes feeder hold down brackets for the F5 that does prevent the operator from leaving the feeder in a position that can cause a crash. The brackets attach to the feeder table so you need one bracket per table. The part part number for the b
Electronics Forum | Tue May 08 08:26:15 EDT 2001 | caldon
Yes Siemens has a fixed tray feeder for matrix trays. If I remember correctly the tray will occupy 1/2 of the table.The feeder is a two part system 1) is the base 2) the the flat tray (just like what is used in the waffle pack changer). the flat tray
Electronics Forum | Wed May 22 10:27:33 EDT 2002 | stefwitt
Fiducial recognition on the Siemens machine works like the Mydata. Once you select this option, fiducials will be recognized when a new program is send. You can also select recognition as part of the feeder refill function mode. There is no automatic
Electronics Forum | Fri Jun 12 15:06:45 EDT 1998 | Marcos Silva
| You can prepare your setup off line, using additional tables, and exchange very fast just sending the new program and checking using a barcode reader. Also you can edit a setup program with mixed feeders between PCB families. You can decrease your
