Electronics Forum | Tue Nov 13 04:47:19 EST 2018 | dhammika
hi Siplace Hs-60 defected due to below error Error- • Machine error:2271 Can bus: reception call aborted with time out seg:0 DEV: head 2 #:1 (this is not only head 2 ,error raise with all head interm
Electronics Forum | Fri Nov 17 09:29:27 EST 2000 | CAL
Some more information is needed. Is there a machine error indicating a mispick? Or a vision error Component missing? I am not as familiar with UIC machines as I am with Siemens but here is my $.02 anyway. Try shimming the feeder under the pick up pos
Electronics Forum | Tue Apr 23 07:08:35 EDT 2019 | robertorocco
Good morning I have a problem with start my Samsung CP40 C machine. After the start Bios win98, and Dpram Initialise, system loading , vision data loading, one icone error visualize: Error Mcp, General error SCP.Exe. Solutions? Thanks
Electronics Forum | Mon Aug 27 10:17:25 EDT 2007 | Smartens
We bought a used Siemens (thus we have no factory support just yet...) and have run into a bit of a "catch 22" situation. We got an "General Error :694 Incorrect nozzle length" and in the past this had to do with having a defective nozzle on the sle
Electronics Forum | Fri Nov 05 17:17:32 EST 1999 | NickMata
Fred, The system will base itself on the information within the GF file. In the GF file you provide the description as to the physical dimensions, features, tolerances and handling for the part. Once the component has picked up the image, it is "see
Electronics Forum | Tue Sep 02 15:35:55 EDT 2008 | modernprecison
I have a Siemens S-27 and I'm having occasional issues with 0201 components in particular. I'm using the 12 segment head and 902 nozzles with them. I'm making sure the magnet is clean of debris and the feeder is sitting flat. Most of the time they
Electronics Forum | Wed Sep 10 07:42:52 EDT 2008 | lloyd
Can you provide a bit more info on your machine setup. I not full fimilar with the S-27 so a few points may not be relevant to your machine. Are you using Siplace Pro. Are you using the standard GF for the 0201 component. Do you have the component
Electronics Forum | Wed May 09 12:07:52 EDT 2001 | caldon
My personal favorite is the Siemens F series and the UIC GSM platform. Both Siemens and UIC have awesome resources for csp, flipchip and baredie processing - Siemens= Dan Baldwin from GaTech; UIC = George Westby from UIC labs. My second choice would
Electronics Forum | Tue Apr 29 14:13:52 EDT 2003 | stefwitt
My opinion to hold on to your machines was based on the current market situation. First of all, I don�t believe that a customer with ten boards will go to China for prototype production. Truth is, that the remaining market here is the prototyping mar
Electronics Forum | Thu Mar 18 12:32:16 EST 2004 | steve_arneson
There are many low cost paste inspection systems on the market today. It really depends upon your overall needs for process improvement. The CyberOptics LSM series of inspection devices use a single laser stripe to calculate both Height, Area and V
Industrial Sensor Vision International specializes in advanced camera technology of high resolution fast speed cameras for automation, AOI, 2-D/3-D, SPI inspection and wafer inspection.
3 Morse Road 2A
Oxford, CT USA
Phone: +1 203 592 8723
