Electronics Forum | Mon Sep 14 21:40:25 EDT 1998 | Stefan W.
Unfortunatly there are too many variables to play with that you can't make a general rule for the vibration time. However, I suggest you increase the vibration time and lower the vibration force ( AC voltage ). For an SO 8, I would use 600 ms for an
Electronics Forum | Thu Mar 05 17:28:37 EST 2020 | sportsradar
I am desperate. I have an 80S15 with a single line controller that we program with and control our 80S15 machine. Everything has been working great until last month. We have not done any changes, and no new programs or jobs. We went to start the PC
Electronics Forum | Thu Mar 05 23:04:44 EST 2020 | sarason
My advice for what it is worth. Your description of the problem at first glance suggests a communication problem, now is it the bus, the SMT machine or the PC. The bus could have a short or an open. The PC could have a dud controller card. or so co
Electronics Forum | Wed Nov 17 15:01:44 EST 1999 | Doug Philbrick
I am a Siemens person myself but you won't get 23", you can get 20 though and I believe you could feed in a 23" board length wise. If your parts fit in a 20" area 80F4 is the way I would go. My second choice would be MYdata. They are the large board
Electronics Forum | Tue Aug 28 11:40:03 EDT 2007 | lloyd
As in the previous reply, When the machine is powered up don't press the start button. Just wait until the software has loaded then go into Sitest (you may need to logon as SERVICE). In the gantry or head menu's you should find the nozzle configurat
Electronics Forum | Sun Sep 12 07:25:26 EDT 1999 | Eyal Dickerman
| | To all SiPlace Users, | | | | I know there are lots of you out there! From your own experiences, what sort of life expectancy would you expect (in terms of number of placements) from a rotary star head for a Siplace 80S15 or 80S20 machine, befor
Electronics Forum | Fri Jul 24 09:50:13 EDT 1998 | Justin Medernach
200 boards/Hr and oven will reflow ~180 boards/Hr but the P&P machine will only place 700-950 CPH | when setup is taken into account. Minimum pitch is normally .020" and we place an Avg. of 491 TSSOPs and 217 BGAs a month. | We don't even bother wit
Electronics Forum | Tue Apr 21 12:48:41 EDT 1998 | Derek Drabenstadt
| I would like to know something about Siemens machines from users of Siplace or old machines. | Thanks ! I have been working in a shop with 80-S and 80-F machines for two years. The down time we have experienced is significant. Up to 25%.
Electronics Forum | Fri Jan 21 05:39:58 EST 2000 | Scott Davies
Hi ZJJ, I know exactly where you're coming from on this one! We have a similar situation here with a SiPlace 80S-15, rated at 15K max per hour. In practice, we achieve about 11K. The reason is fairly straightforward. The quoted maximum placements pe
Electronics Forum | Tue Mar 17 16:27:32 EDT 2020 | sportsradar
With LC off, the machine when told "Without LC" will zero set. It displays Error 746. After zero set, turn LC on, and it hangs up. Error 746 is IEC blocked, solutions Reboot machine and PC. And we know, rebooting isn't getting me anywhere. What car