Electronics Forum | Tue Dec 12 14:47:55 EST 2000 | Chris Newell
We run Siemens SiPlace SMT equipment. One of our biggest problems is feeder tape splices jamming our feeders. We use Siemens recommended method of splicing our feeder tapes together. This has been causing upwards of 10% lost time on some of our build
Electronics Forum | Wed Dec 13 03:40:13 EST 2000 | G. English
We have seen this problem, again using the methods recommended by Siemens. We tried different methods of splicing the tapes, but again the material was clogging in the feeders and especially in the cogs which grip and feed the tape. The only method
Electronics Forum | Wed Dec 13 12:08:57 EST 2000 | Stefan Witte
Apparently the adhesive tape peels off from the joint, which could have some reasons. 1. There should be an overlap of the cover tape, as Cal mentioned. The new cover tape laying over the old by approx. 2mm. I also peel the cover tape a bit off, whi
Electronics Forum | Wed May 21 20:58:48 EDT 2003 | star7483
APPLICATION: SMT CARRIER TAPE FEATURE: �� High efficiency: joining is accomplished without shutting off the machine. The SMT machine can increase output 5%-15%. �� Reducing SMT machine and feeder abrasion: There is no need to unload & reload feeder
Electronics Forum | Tue Sep 28 11:38:22 EDT 2004 | jsloot
Can anyone recommend a manufacturer in Canada for SMT tape splicing tools? Thanks
Electronics Forum | Thu Apr 13 13:38:29 EDT 2006 | smdtapesplice.com
We have the perfect SMD Tape Splice solution that runs flawless through your pick and place machine. Our splices run through Fuji, Panasonic, Siemens, Juki, Universal, Quad/Tyco, Samsung, Sanyo, Mydata etc.. We have a loan program for testing our T
Electronics Forum | Fri Jun 16 00:45:19 EDT 2006 | Richard Robins-Bird
Not all splicing tapes require the use of specialist tooling or splicing plates to make a join. Please see wwww.fujismt.com where a complete range of SMT splicing tapes (Joint Tapes) can be found for use with chip mounters such as Assembleon, Europla
Electronics Forum | Sat Jun 05 07:47:47 EDT 1999 | Dave F
| | | Has anyone had a problem with the trailer tape length being too short and causing placement machine to stop for parts exhaust (SMT parts)? I realize the EIA spec. is set for this length but would like to know what issues you have had. Thanks
Electronics Forum | Wed Mar 03 07:54:37 EST 2004 | stefwitt
According to inquiries of splicing tape, it is been done at many places. I do agree that the feeder fouls badly, if the splice brakes. How much longer does it take to fix the problem with a broken splice? How quickly can you change a feeder/tape with
Electronics Forum | Wed Mar 03 09:21:53 EST 2004 | davef
We splice no tapes. Search the fine SMTnet Archives for additional discussion.
Main Products: 1. Original new and Original Used SMT/AI Spare Parts. 2. SMT Equipments And Related Machine( SMT Calibration, SMT Feeder Carts,Conveyer etc.) 3. Maintenace and Repair Service Pre-Sales Service Provide details ab
Manufacturer's Representative / Manufacturer / Equipment Dealer / Broker / Auctions / Consultant / Service Provider
Building A, Jiepeng Square, Fuyong
Shenzhen, 30 China
Phone: 0755-33578694