Electronics Forum | Mon Mar 24 15:28:27 EDT 2014 | yuran111
don`t have. give me please it. simens f5 with 6 segment head and IC-head. two conveyor. and if you can lower the entire inner hard drive, and then erased accidentally and slipped from siemens s27. thanks
Electronics Forum | Tue Feb 12 10:51:46 EST 2002 | stefwitt
Dave is right. There is no machine on the market which can handle a 1.5 m long "board". If you or someone else will have to tinker with a custom made machine, it will be less expensive to use a used machine ( I could be offering some used Siemens mac
Electronics Forum | Thu Jan 31 04:02:09 EST 2019 | sarason
Is it that you have some solder paste blocking your line or the head ?
Electronics Forum | Wed Feb 06 01:24:24 EST 2019 | mst3000
Thanks Ry-n. We will look into them.
Electronics Forum | Wed Jan 30 08:27:37 EST 2019 | mst3000
Hi there. We are facing an issue with the placing head of our SMT machine SIEMENS SIPLACE CF 2004 model where the vacuum reading is low (820 instead of 900). This is resulting in that the components are either falling off when the head moves onto the
Electronics Forum | Thu Jan 31 04:19:54 EST 2019 | mst3000
Thanks. Full maintenance has been carried out and the head was removed. No traces of solder paste was noted.
Electronics Forum | Mon Feb 04 01:26:57 EST 2019 | mst3000
Hi Ry-n, we have checked the hoses for any cracks. The vaccum measuring board was changed also. Its an S20. Thanks, Steve
Electronics Forum | Fri Feb 01 11:17:21 EST 2019 | youngbuck
Hi, Make sure to check any cracked, pinched, kinked hoses. Also when taking the whole gantry off there are clear hoses that can get pinched. Also, may want to changed the vaccum measuring board. Is this a S20 or F4,f5 or hs50 Thanks,
Electronics Forum | Tue Feb 05 13:14:27 EST 2019 | youngbuck
Hi Steve, Have you took the star completely off the Gantry. There are the 12 hoses to the star if Segment 1 connection hose is messed up everything will be off because everything gets measure off of Seg.1. Also, you could start eleiminating the probl
Electronics Forum | Thu Dec 22 13:16:07 EST 2005 | Cmiller
You may want to take a quick look at the tier one equipment suppliers. Universal and Fuji have some very competitive equipment, not sure about Panasonic and Siemens but they have to be trying to compete as well. We are low volume and never thought we